Page 8 of 9
Posted: Sun Oct 30, 2011 8:17 pm
by subius
yep, still got it, let me know when you're coming down and we'll sort something out
lib handbrake parts
Posted: Mon Nov 14, 2011 8:37 pm
by subius
Hey guys, need the clamp that goes behind the handbrake lever that holds the cables to the trans tunnel. anyone got one?
Cheers
Sam
Posted: Mon Dec 05, 2011 11:39 am
by vhr32
Does anyone have a 3.7 rear L series (RX turbo) LSD???
Does anyone know what they normally sell for?!
L series kyb rear shocks
Posted: Mon Dec 05, 2011 7:56 pm
by subius
Bought a set of brand new kybs for the back of the vortex, turns out I bought the wrong ones so they are up for sale. Done about 2km so essentially brand new. kyb part number 341214, they are for a 2wd sedan and have higher spring seats than the wagon ones.
More info in the for sale section or just drop me a pm.
$220 for the pair.
retail at $168 each
Cheers
Sam
Posted: Thu Dec 08, 2011 9:34 am
by vhr32
GIVE AWAY
EA82 MPFI engine, 99% complete but still assembled.
Blown head gasket?
Launceston
0407 842 553
URGENT crank shaft pulley launceston
Posted: Sun Jan 08, 2012 12:50 pm
by ScubyRoo
Hey tassie crew
I'm currently in Launceston and my crank shaft pulley has shat itself. It's rounded out the locating notch and is unbalanced, it's spat the altenator/ps belt off once already and I don't want to drive the car much further. As I'm supposed to be road tripping with mates while we're down from Vic this is a sh*t thing to happen.
Can anyone suggest where I could look (wreckers? auto suppliers?) for a replacement? I don't want to spend a fortune from Subaru and they would probably have to order it from sydney anyway.
Being Sunday everything is closed - where should I call tomorrow? Also looking for a mechanic to do the work as I don't have the necessary tools with me.
Car is a '97 outback, 2.5L manual.
Any help is massively appreciated!
Cheers,
Owen.
0406 003 763 / 0400 956 848
Posted: Sun Jan 08, 2012 2:28 pm
by NachaLuva
Does this thread "Wrecking Tasmania" mean Tasmania is being wrecked?
If so by who? & why?
I will be sorry to see it go....
Posted: Mon Jan 09, 2012 7:42 am
by vhr32
FOR SALE:
L series genuine Subaru alloy over bumper style bullbar $20
NEW L series rear wheel bearing kits and tie rod ends $120
http://img.photobucket.com/albums/v478/ ... CF4125.jpg
Grey fiberglass/vinyl speaker pods $20
http://img.photobucket.com/albums/v478/ ... CF4132.jpg
New snow chains, suit Rav4 or similar 235/60-16, have list of other sizes it fits $20
http://img.photobucket.com/albums/v478/ ... CF4135.jpg
Matt
Launceston 0407 842 553
Posted: Wed Jan 18, 2012 10:43 am
by ScubyRoo
Thanks for the txt btw matt, the joint you recommend had what I needed
Big thanks mate!
Posted: Thu Feb 23, 2012 5:55 pm
by vhr32
(No worries, wasn't sure if you even got it!)
I am after a set of four plastic timing belt covers to suit my 1988 L series EA82.
Will pay postage to 7250 Launceston.
Matt
0407 842 553
Posted: Wed Mar 21, 2012 7:15 pm
by Frosty2086
Hey Guys,
I have a 1988 L series wagon with a rebuilt EA82 engine, head has cracked so she is running hot now, when it was rebuilt was top and bottom end so the short motor is good.
Has two good tires, body is a bit rough. Free to a good home!! A six pack would be appreciated though
Located in Deviot.
Give me an email or call phone call on 0427 035 175 if your keen.
I am at sea between the 24th and 30th of March so just leave a message!
Cheers
Frosty
Posted: Mon Mar 26, 2012 4:23 pm
by subius
I reckon I'll take it. Sounds perfect to leave down at the shack to take the boat down to the beach. I'll talk to you again when you get back.
Cheers
Sam
Posted: Tue Apr 03, 2012 2:38 pm
by BRUMBERTY
nachaluva wrote:Does this thread "Wrecking Tasmania" mean Tasmania is being wrecked?
If so by who? & why?
I will be sorry to see it go....
its being wrecked by a business called gunns!
Why, we ask that too but the world needs toilet paper and phone books.
we sell them old growth forest for a few bucks a tonne to make it.
Sorry, we are very sorry, angry and sad if they build the proposed pulp mill and really ruin it.
Posted: Sat Apr 07, 2012 8:42 pm
by KaFoomaN
BRUMBERTY wrote:its being wrecked by a business called gunns!
Why, we ask that too but the world needs toilet paper and phone books.
we sell them old growth forest for a few bucks a tonne to make it.
Sorry, we are very sorry, angry and sad if they build the proposed pulp mill and really ruin it.
Amen! and unfortunately there isn't much that we Tasmanian's can do about it but protest
mind you, a couple a years ago a friend and i drunkenly took matters into our own hands and put a homemade 'firecracker' on the CEO's door step and painted a dick on his fence.. diddn't go down too well but shortly after he quit..
Posted: Sun Apr 08, 2012 3:56 pm
by BRUMBERTY
KaFoomaN wrote:Amen! and unfortunately there isn't much that we Tasmanian's can do about it but protest
mind you, a couple a years ago a friend and i drunkenly took matters into our own hands and put a homemade 'firecracker' on the CEO's door step and painted a dick on his fence.. diddn't go down too well but shortly after he quit..
I cant say it's the most effective way of getting your point out there but hey.
Well done.
Ding dong the king is dead (and charged).
You were part of his Un-doing.
It was seen.
Bravo.
Posted: Mon Jun 25, 2012 3:18 pm
by subius
Anyone got a functional L series radiator surplus to their needs?
Cheers
Sam
bull bar/ roo bar
Posted: Fri Jul 13, 2012 1:02 pm
by subius
Anyone got an L series bull bar or roobar they don't need?
Cheers
Sam
Posted: Wed Aug 01, 2012 10:30 pm
by JKM
Anyone have EJ22 headers in TAS they'd like sell?
Posted: Mon Sep 03, 2012 3:05 pm
by tasscube
Have spotted an awesome green forester lately at Bothwell and around with a lift, snorkel and other mods does anybody know his name or contacts would love to compare foresters and see how he has done his mods.
Posted: Sat Sep 08, 2012 1:21 am
by vhr32
Anyone got a standard steel rim and tyre to suit an L series to use as a spare?
Launceston TAS
