My WRX Offroader for sale

Post Reply
User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

My WRX Offroader for sale

Post by d_generate » Wed Jul 04, 2012 1:10 am

Sorry but not sure how to give a gold coin and this really only concerns WA, quite happy to donate but can't stand the for sale format.

Oh Well one of my cars has to go as I'm going o/s to live, not sure if I'll last 6 month or 6 yrs so I've decided to keep the liberty as it's body is shagged from the hail and it's easier to store.

So here goes.....94 WRX bought 7yrs ago, legally re-bodied with a 97 V3 STI body (inspected, documented and photographed by Graham Parkes who was head of pits at the time back in 05) then left to sit under a tarp for a few yrs while I decided what to do with it, off road was always on my mind and when I picked up the rear wheel carrier that was it.

Still has original floor, firewall and front rails but the rest updated to 99/00, interior is almost perfect V3 STI.

When I finally dragged it out from under the tarp and got it painted 3 1/2yrs ago and put it over the pits, they failed it on a loose bolt and a cable tie on a strut instead of a brake clip which I'd forgotten about and the wanker decided I then needed to get it engineered, so it comes with the lift kit engineered and permitted for the wheel carrier and a pod filter which is now gone.

Outside...Subaru Gravel Express wheel carrier and front bar which has been modded and strengthened back to the front X member, Rolla cross bars on original rails, 5 X GT Forester wheels, larger JDM wings.

Underneath...Huge 6mm alloy sump and gearbox guard, GD lower control arms, mostly alloy block lifts under every point of the car and 32mm Outback blocks on the front X member, 25mm front strut top lifts, rear diff guard, extended front STI sway bar links, rear camber bolts, 3" TBE back to a stock WRX muffler (early Butler) Forester struts with Dobinson high lift HD springs, rides and handles very much like a normal WRX

Gearbox...Fully reconditioned 92 hi/lo Liberty box, new bearings, main shaft, synchro's, new from US OBX Helical front LSD, 4.44 crown wheel and pinion instead of the 3.9, rear diff also matching, Redline smurf blood in box and all done less than 5,000k's.

Engine... I was told it was re-conditioned by the previous owner about 30,000k's before I bought it and I've only done about 10,000K's in 7yrs , new timing belt was fitted when I bought it and it's due for it's 5,000k service in about 1,000k's.

Comes with brand new 4,000lb winch, 4 ramps, tow strap, brand new twin tipped chrome hi flow muffler, a few hoses and other bits n pieces.

Mostly been documented in off road thread.

I built it mainly for sand work but it handles the rough really well.

Will be going on Carsales in a couple of days but figured I'd give the forums first bite.

$10,500 here, $11,500 on Carsales
PM or 0403430079, I don't carry with me but usually home after 12.30pm

Only bad point is it's in need of tyres, one has a stress pinch and the rear toe in bolt was left loose by the wheel aligner and quickly chewed the rears out, also would be much better off with 215/65/16's (cheap commodore tyres) instead of the 205/60/16's it has now.

Pimpreza Lancelin 2012 - YouTube

Image

Image

Image

Image

Image
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Wed Jul 04, 2012 4:02 am

I hope its a forum member that buys it and we will see it many more times out 4wding with us..
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
thunder039
Junior Member
Posts: 998
Joined: Mon Jun 20, 2011 6:41 pm
Location: victoria AUS

Post by thunder039 » Wed Jul 04, 2012 8:42 am

sorry to hear that you are selling. were about are you moving over seas? were ever it is have fun!
2004 subaru forester -gone
1999 subaru forester- no more :(
1989 subaru brumby- sold!
2008 zook jimny -sold!
2003 mitsubishi pajero - missus car
2013 nissan d22- set up for long distant touring

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Wed Jul 04, 2012 4:30 pm

I'm going to South Thailand "Krabi" to start with, see how it goes with the gf then possibly move north to Chiang Mai/Rai and buy a business but who knows???? Could be back in 3 months lol, if I do I'll lift the Liberty.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

Post by seagull » Sat Jul 07, 2012 11:25 am

Re Gearbox...Fully reconditioned 92 hi/lo Liberty box, new bearings, main shaft, synchro's, new from US OBX Helical front LSD, 4.44 crown wheel and pinion instead of the 3.9, rear diff also matching, Redline smurf blood in box and all done less than 5,000k's.


That's all new components in stalled apart from the 4.44 crown wheel and pinon that was from a very low K jap import V3 sti gear box

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Sat Jul 07, 2012 9:03 pm

Thanks Neil, needs new owner.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Fri Aug 03, 2012 7:21 pm

Price drop to $9,500, I'd rather sell than store it......make me an offer.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sun Aug 05, 2012 10:38 am

Leave it with me and I'll store it in the new workshop until sold.


I'll even give it a run to the dunes every so often to make sure it doesn't get home sick :p
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Sun Aug 05, 2012 4:54 pm

Trust me, it's on the cards if it doesn't go by Sunday the 19th "seriously"...........BUT you bend it you mend it though it is insured by Shannons.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Mon Aug 13, 2012 10:12 pm

SOLD...........Passed a quite grueling inspection with flying colours and very soon to be on it's way to Qld, we may have a new member here Panda.

If I decide to pull the pin on Thailand in the near future I'll be out there with the Liberty....Lifted of course.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Mon Aug 13, 2012 10:31 pm

Good stuff! Is it being trucked over to QLD or driven??

And what is it with cars going between WA and Qld and vice versa? Curious.

Looking forward to the new owner joining up so we can continue to watch the fun this subi offers...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Mon Aug 13, 2012 10:49 pm

Yeah once the money is cleared I'll drop it off at the transport yard, hopefully tomorrow night or Wed then up to 17days but $1140 to Brisbane is pretty good.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Tue Aug 14, 2012 8:29 am

d_generate wrote:Yeah once the money is cleared I'll drop it off at the transport yard, hopefully tomorrow night or Wed then up to 17days but $1140 to Brisbane is pretty good.
That is good, I got quoted 1500 dollars to get my brumby to Karratha by truck. it would'v cost a 3rd of that in fuel to drive there (my sanity as well)

Glad to see it went to a subi nut

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Tue Aug 14, 2012 7:35 pm

Oh yeah he's a Subi nut for sure, money cleared and I'll drop it off in Kewdale tomorrow..........HMMMM Pines tonight anyone hahahaha.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

Post Reply

Return to “Western Australia”