Page 1 of 1
Rego WA Stating GVM Original hand Book e copy
Posted: Fri Apr 08, 2011 11:48 pm
by Morcs
Trying to get my Brumby transferred into Western Asutralia
I need a copy of the original owners hand book stating the GVM
As a photo of the compliance plate is not good enough...
if any on could PM me ill give them an email Address.
Posted: Sat Apr 09, 2011 12:56 am
by steptoe
My handbook only states a loading capacity of 400kg - under the tyre section. Sheesh they should subscribe to the Fed dept transport data sheets, sounds like yo dealing with lazy appointed mechanic come inspector
Posted: Sat Apr 09, 2011 1:04 am
by steptoe
The info is only a depiction of a comp plate with GVM 1620 kg of 1985 utility on NSW documents known as SUBARU 17 specification sheet number , WA Transport must have published them at some stage. Tell 'em to request it off NSW tech enquiries 1300 137302 in NSW anyway
Posted: Sat Apr 09, 2011 10:44 am
by TOONGA
I have the original 1989 1800 MV owners manual, do you need the whole book scanned or certain pages?
as well I have the Australian suppliment
TOONGA
Posted: Sat Apr 09, 2011 8:09 pm
by Morcs
steptoe wrote:My handbook only states a loading capacity of 400kg - under the tyre section. Sheesh they should subscribe to the Fed dept transport data sheets, sounds like yo dealing with lazy appointed mechanic come inspector
Thats what i reckon is happening but it is to do with the licensing dept in Perth
Had a talk to one of the local inspection guys this morning he said its not uncommon for them just to request a inspection just for the rigmarole caused to the customer asking for something BS that cant be supplied without going to be inspected.
Posted: Sat Apr 09, 2011 8:11 pm
by Morcs
TOONGA wrote:I have the original 1989 1800 MV owners manual, do you need the whole book scanned or certain pages?
as well I have the Australian suppliment
TOONGA
If you could just the section on the gvm and weights etc
Posted: Sat Apr 09, 2011 8:28 pm
by TOONGA
Ive looked through the whole manual and for the life of me i can't find anything on curb weight, loaded weight etc. sorry.
this manual has the info for the brat in the general specifications chapter
http://jdmfsm.info/Auto/Japan/Subaru/-- ... 20EA81.pdf
added the specs pages from the manual
hope that helps
TOONGA
Posted: Sun Apr 10, 2011 2:50 am
by steptoe
send me yer email addy and i'll zoot off a pdf i have on desktop but cannot get into here
Posted: Sun Apr 10, 2011 10:20 am
by chriSTIan
the pits have a book with the weights of most cars in it,just being lasy as usual.
U might have to go to a weigh bridge then
Posted: Sun Apr 10, 2011 10:57 am
by steptoe
weighbridge does the tare not gross
Posted: Sun Apr 10, 2011 11:01 am
by TOONGA
here are the pages from the pdf link
and thats about it for information Ive been able to find
TOONGA