WA stickers

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

WA stickers

Post by guyph_01 » Fri Jul 09, 2010 3:36 am

Availability and prices:
10 x The small Logo, (270mm long-100mm Wide) $10ea
9 x The Big Logo, (530mm long-170mm Wide) $15ea
5 x Windscreen sticker (950mm long - 110mm Wide) One size fits all {brumby,L series, Foz, Impreza, outback etc $20ea
4 x Ausubaru small sticker (630mmlong-50mm Wide) $10ea

So thats what they look like

The Big Logo, (530mm long-170mm Wide)
Image

The small Logo, (270mm long-100mm Wide)
Image

Image

Windscreen sticker (950mm long - 110mm Wide) One size fits all {brumby,L series, Foz, Impreza, outback etc
Image

Ausubaru small sticker (630mmlong-50mm Wide)
Image
Also fits perfectly on the tailgate left side of the wiper
Image

Ausubaru big Sticker
Image
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Fri Jul 09, 2010 11:16 am

I actually have some of the original print left over. Since moving house i am a little unsure as to their exact location however will hunt them down if your interested.
Toyota 105 Series LandCruiser (that nobody on here wants to really hear about).
RX Touring Wagon - fitted out for 4WDing (currently collecting dust).
RX Project - will be road only at this stage (and currently taking way to long to finish).

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Fri Jul 09, 2010 11:24 am

this is what the old ones look like...

Image
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
Subafury
Senior Member
Posts: 2985
Joined: Sun Apr 30, 2006 10:00 am
Location: Duncraig, WA

Post by Subafury » Fri Jul 09, 2010 2:57 pm

I'm sure you've got a better pic alex. Subaman on this forum did the original design fyi
Image

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Fri Jul 09, 2010 3:23 pm

not on my photobucket i dont.

might uplaod tonight if i get a chance ayeeee
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
Mr Top Hat
Junior Member
Posts: 225
Joined: Fri Mar 13, 2009 8:04 pm
Location: wa scarborough

Post by Mr Top Hat » Fri Jul 09, 2010 7:30 pm

I'm in ill buy some!!! :)
1990 L series wagon Ej22
Image

i didn't realize this image was so large :-O

User avatar
Wagonman
Junior Member
Posts: 267
Joined: Sat Oct 17, 2009 5:39 pm
Location: Yangebup WA

Post by Wagonman » Fri Jul 09, 2010 9:26 pm

Hey all..

Guyph and I have been talking about getting some stickers happening.. I have easy access to getting stickers made for a small price for vinyl.

I just got some from guyph that look like the first pic.

I can get more of the large print "SUBARU" for the front wondscreen which i have on my car. Could get some made for the rear too if people want.

I could easily get "www.ausubaru.com" stickers made..

I also have a rear windscreen decal that I could modify to have a subaru emblem in the middle..

So yeah let us know your interest and we can see what we can do.
Attachments
Windscreen.jpg
Windscreen.jpg (82.24 KiB) Viewed 3459 times
sticker.jpg
sticker.jpg (86.9 KiB) Viewed 3463 times
rear window.jpg
rear window.jpg (89.54 KiB) Viewed 3463 times

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Fri Jul 09, 2010 9:54 pm

I wanted to find out first before me and wagonman go ahead with this is are there any Legal issues of us using the AUSubaru name?
We just want to make some stickers for fellow members, and giving a few design options as we were not able to easily find the original stickers.

Here is an example of the one i got made
Image
We are still working on other designs :)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
Dann
Junior Member
Posts: 232
Joined: Thu May 13, 2010 6:39 pm
Location: Perth

Post by Dann » Sat Jul 10, 2010 12:10 am

hey guys
i'm in for one of those, looks pretty sweet :p
do you guys know the price range yet or to early for that?
keep us updated
Cheers,
Dann
http://www.ausubaru.com/forum/showthrea ... t=dann%27s

Looking for:
- LSD diff

Image
IMG_0957 by Dann_Evans, on Flickr

User avatar
longy99gt
Junior Member
Posts: 267
Joined: Mon Apr 19, 2010 3:23 pm
Location: Perth-WA
Contact:

Post by longy99gt » Sat Jul 10, 2010 12:12 am

wouldnt mind getting my hands on them once some are made?
i liked the one on the liberty? good size
"SUUBMARINE"

Previous Previous- 92 LX liberty wagon 5MT, FWD

Previous- 99 GT fozzy white/grey, 5MT,
UHF / 3" >2.5" exhuast / metal sump guard / custom snorkel / 2" lift / 215/70R16 ATR's / custom pine/ply boot with fridge mount/ 2 deep cycle batteries, spotties on UNIbar

Current Project: 2007 XT 5MT Urban Grey Forester
Subaextreme Bullbar and sump guard. GME 5W Super Compact UHF. Custom Boot with Deep cycle 100A Battery, Tools storage, solar controller and low Volt shut off, with Anderson input and outputs.
Whiteline HD Adjustable front and rear sway bars
Whiteline front tower brace and ultrex rear tower brace.
235/50/17 street tires, 235/60/16 ATR's
KYB struts with Raised HD Iron Man Springs. 1"Subtle Solutions strut top blocks.
20" LED Front Light Bar
Side Shade Awning on roof racks with 2x 18W LED Flood lights and 3x LED string lights in awning

Future: Solar Panel roof mounted(under roof basket), Low range Conversion (1.44), HD clutch, 3">2.5"TBE, Rear tire carrier,

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sat Jul 10, 2010 2:16 pm

So guys,

Would there be any objections for Wagonman and I to organise and get some new WAstickers made to sell to other forum members??

Any one else interested in stickers?
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sat Jul 10, 2010 8:13 pm

I'd take a few Guy :)

Will call ya when I get home but definately 1 for the Brat and a couple of smaller side ones for the L

Cheers,
Paul
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Fri Jul 16, 2010 9:23 am

Hi guys,

I have made three designs of the sticker. at first i was thinking of making all three and people could choose what they preferred but then decided that since its a forum and we are kinda one big family we should all have the same sticker.
So plz vote on the one you prefer out of the three and the highest the sticker that gets the most votes will become the new sticker:)

Image
Image

I personally prefer decal 3:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Fri Jul 16, 2010 9:31 am

guyph_01 wrote:I personally prefer decal 3:)
Me 2.. +1 for #3
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
longy99gt
Junior Member
Posts: 267
Joined: Mon Apr 19, 2010 3:23 pm
Location: Perth-WA
Contact:

Post by longy99gt » Sat Jul 17, 2010 9:09 pm

yeah, i'd go #3, and about 4-6 of them?
"SUUBMARINE"

Previous Previous- 92 LX liberty wagon 5MT, FWD

Previous- 99 GT fozzy white/grey, 5MT,
UHF / 3" >2.5" exhuast / metal sump guard / custom snorkel / 2" lift / 215/70R16 ATR's / custom pine/ply boot with fridge mount/ 2 deep cycle batteries, spotties on UNIbar

Current Project: 2007 XT 5MT Urban Grey Forester
Subaextreme Bullbar and sump guard. GME 5W Super Compact UHF. Custom Boot with Deep cycle 100A Battery, Tools storage, solar controller and low Volt shut off, with Anderson input and outputs.
Whiteline HD Adjustable front and rear sway bars
Whiteline front tower brace and ultrex rear tower brace.
235/50/17 street tires, 235/60/16 ATR's
KYB struts with Raised HD Iron Man Springs. 1"Subtle Solutions strut top blocks.
20" LED Front Light Bar
Side Shade Awning on roof racks with 2x 18W LED Flood lights and 3x LED string lights in awning

Future: Solar Panel roof mounted(under roof basket), Low range Conversion (1.44), HD clutch, 3">2.5"TBE, Rear tire carrier,

User avatar
Pav
Junior Member
Posts: 185
Joined: Tue Apr 28, 2009 10:18 pm
Location: WA Perth, Joondalup

Post by Pav » Sat Jul 17, 2010 11:53 pm

I'll have one of those for sure, yeah #3 looks nice

How big are they?

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sun Jul 18, 2010 1:34 am

Right now we are just deciding which one to use as the WA logo. (votes are in favour of No3)
We are thinking of making just one common size but not yet decided.
Let us know if you guys prefer a particular size. Just specify the length you would like and we will make it proportional.
This will help to determined the most popular size to print out a common size to try and make everyone happy.

As a guideline, The one on the RED brumby is 510cm long and 200 high.
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
electricbluejase
Junior Member
Posts: 10
Joined: Mon Jul 19, 2010 2:57 am
Location: Wilson/WA

Post by electricbluejase » Tue Jul 20, 2010 11:52 pm

I think #3 is also a good one :-)

User avatar
d_generate
General Member
Posts: 1529
Joined: Sat Feb 16, 2008 1:51 am
Location: Back in Perth and SORing it atm.

Post by d_generate » Wed Jul 21, 2010 12:19 am

I prefer no 2 but not being a fan of stickers I'd only be interested in a couple of maybe 10cmX25cm.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M :twisted:
Image

User avatar
D3V1L
Senior Member
Posts: 2661
Joined: Thu Jun 01, 2006 10:00 am
Location: perth, wa

Post by D3V1L » Wed Jul 21, 2010 1:06 am

good to see ur getting it happening....respect for leaving the design NEARLY as it was back in the day!!

i cant find the 2 i had left over, so ill put my hand up for 2 more as brex needs one and so does the other car

davo
no more subarus


[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9



Post Reply

Return to “Western Australia”