Page 1 of 2
EOI : Wagon Part Out Perth
Posted: Tue Dec 09, 2008 9:51 pm
by Matatak
OK
looking to part out my MY Touring Wagon.
EJ22 running great.
Clutch and Flywheel matching Motor to Box
Custom 3 Inch Lift Kit.
5 Speed DR Box all working 3.9 ratio.
Rodeo Rear Shocks for travel.
near new Front KYB's and Kings
Lseries Hubs, Brakes, Control Arms, with Beefy Radius Rods for the L arms.
235/75R15 Tyres on Sunraysias and a very nice BFG Muddy Spare.
Radiator with Modified outlets for EJ Motor.
Cut down Wiring Harness by Subarino.
Liberty Front Seats.
2.7 Ratio WRX Rack with matching WRX pump, Bracket and Lines.
Towbar
Roobar
maybe more i forgot.
looking to see if theyres any interest in Parts, cant see it going as a wholecar.
Posted: Tue Dec 09, 2008 10:26 pm
by Cam
Why?
Interested in suspension...
Posted: Tue Dec 09, 2008 10:39 pm
by AndrewT
he's copped out and got a Pajero (or something).
I'll take the fuel pump, rear driveshafts, (front shafts too if they are MY, but your running L ones now I think?), tow bar and possibly the 29's depending on condition.
Posted: Tue Dec 09, 2008 10:43 pm
by Matatak
New car...so in reality its not gonna get driven. unsure if i want to part it out or do something else with it atm though
i will want to keep it rolling aswell for aslong as possible.
assuming you mean F & R Shockies, Springs and Strut Tops for front?
Posted: Wed Dec 10, 2008 1:14 am
by Alex
if it happens, ill take ur rad rods and rear discs.
Posted: Wed Dec 10, 2008 11:13 am
by Cam
Matatak wrote:assuming you mean F & R Shockies, Springs and Strut Tops for front?
Yep.
Wont that make it two mitsubishi's u'v got then?
Posted: Wed Dec 10, 2008 11:35 am
by Subafury
youre not my friend anymore.
might go for the 6 stud hubs and wheels.
Posted: Wed Dec 10, 2008 12:07 pm
by BrennyV
if all else fails i might take the 6studs to help sell leone
Posted: Wed Dec 10, 2008 5:52 pm
by Matatak
since when did i go 6 stud ?? 4 remember people
nah Cam sold the Lancer awhile back and drove the wagon daily for awhile.
Alex. my Rad Rods are longer then MY and L's (which are both he same length) they will only suit someone wanting to put Lcontrol arms into there MY/Brumby.
Rear discs i forgot about to, they are already drilled for either 4x140 or 4x100 PCD's and i didnt want to put an extra 4 holes in them for 6 studs so unsure how youd go about that alex.
Posted: Wed Dec 10, 2008 10:30 pm
by 90brumby
possibly take the rad and fans
Posted: Thu Dec 11, 2008 5:45 pm
by Matatak
i want to keep it rolling/ driving for now
so CAM if you want the suspension can your old stuff go back in?
Posted: Thu Dec 11, 2008 8:07 pm
by SuBaRiNo
Could be interested in Radius rods and L control arms if they were done by a welding place or by Vidler. Not interested if done by Wacky Workshop.
Dave
Posted: Thu Dec 11, 2008 8:46 pm
by Matatak
SuBaRiNo wrote:Could be interested in Radius rods and L control arms if they were done by a welding place or by Vidler. Not interested if done by Wacky Workshop.
Dave
i love your attitude Dave. always impresses me.
the Rad Rods are from Jeff at Crossbred Performance.
Posted: Fri Dec 12, 2008 12:50 am
by AndrewT
The L series control arms were most likely made by Subaru.
Posted: Fri Dec 12, 2008 11:41 pm
by SuBaRiNo
I remove my interest. Good Luck
Dave
Posted: Sat Dec 13, 2008 7:39 pm
by Subafury
since when is the WW dodgy?! hahahahaha
Posted: Sat Dec 13, 2008 8:07 pm
by Alex
Subafury wrote:since when is the WW dodgy?! hahahahaha
it never is. We are the best WW in the world. Id drive my kids around in a WW car(pity i dont have kids) mmmm
alex
Posted: Mon Jan 26, 2009 8:13 pm
by Matatak
Car is being Parted out.
Motor is gone, Clutch is gone, Wheels are gone.
Anybody want some rear discs? straight bolt up.
Cam do u still want anything on the supsension side of things?
and AndrewT im guessing u still want the rear shafts and fuel pump?
Posted: Mon Jan 26, 2009 9:35 pm
by AndrewT
Yeah wouldn't mind them, will have to sort something out next time we cross paths.
Posted: Tue Jan 27, 2009 5:48 pm
by adamb
how much do u want for the rear discs mat?
cheers