P/S hose needed to suit gen 2
P/S hose needed to suit gen 2
as per title i need a p/s hose its the return off the rack back to pump its for the outback ej25 but i think the ej20 in the forrestors are the same once i get this i can drive my outback again yay
tristan
tristan
The New Owner Of hatchie
A 00 outback for doner car
2 door wrx being restored
owned plently of other subis before
A 00 outback for doner car
2 door wrx being restored
owned plently of other subis before
You could always get a hose made up at Enzed, they could use your old fitting if you have it, otherwise a new fitting probably won't cost too much.
EZ30 L series - Monsterwagon
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
i have since brought the 2 hoses from swan auto 100 buks but the thread in the rack is rooted so im gonna try heli coil it other wise i need that alloy bit where the hose all screw into it appers the same as the 1 in my ute which is gen1
thanks anyway
thanks anyway
The New Owner Of hatchie
A 00 outback for doner car
2 door wrx being restored
owned plently of other subis before
A 00 outback for doner car
2 door wrx being restored
owned plently of other subis before