Wreckers - what's there...

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Wed Jul 02, 2014 2:22 pm

AshR wrote:The engine and Gearbox from the B4 is in the showroom at Jollys (well if it's still there) the car has since been compacted before I could get the interior (Rego was more important than leather interior for the time being)
Don't worry, you didnt miss anything. Someone had taken the sunroof & the interior was left open to the elements...totally stuffed :(

Congrats on the Lib :twisted:
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Mon Oct 27, 2014 7:59 am

PAP Kilsyth 26-10:
Couple of standard Liberty's
Outback
98 Forester
Early Impreza
1982 MY wagon in fairly good condition - almost no rust in the usual spots (bottom of A pillars, rear door, etc). Driver's side door NG but other panels looked ok. Unfortunately no slanted console. It does have the intermittant wiper set up still fitted if anyone wants to upgrade their Brumby...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Nov 12, 2014 6:27 pm

dfoyl wrote:98 Forester
I'm keen to know if it's still there and if so, how many k's, dual range manual?

Chasing one of these boxes ;)

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Wed Nov 12, 2014 8:06 pm

Jollies Dandenong has 8 SF & 2 SG Foresters

125 Greens Rd Dandenong.

Manual gearbox is $148 or $192 with warranty
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Nov 12, 2014 10:10 pm

NachaLuva wrote:Manual gearbox is $148 or $192 with warranty
That's an awesome price! Will have to free up a weekend :twisted:

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Thu Nov 13, 2014 10:06 am

If you go to Jollies I could give you a hand as well as have a look at that engine there
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Thu Nov 13, 2014 8:36 pm

Pity you don't need an auto box from one (98 Foz), as I have one I don't need...
Kilsyth PAP manual gearbox price is $80.50 (though it does say "with diff FWD = $172.50").
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Nov 13, 2014 11:32 pm

dfoyl wrote:Pity you don't need an auto box from one (98 Foz), as I have one I don't need...
Kilsyth PAP manual gearbox price is $80.50 (though it does say "with diff FWD = $172.50").
Nah, not after the auto... Don't know if I'll ever get to an auto for offroading. Love the manual too much!

Last time I purchased a subaru gearbox from PAP it was $250 as it seems to fall into the 4wd gearbox category from memory. This was a long time ago now, I do remember being able to slip a subi box through for $125 when they didn't know what they were...

Nachaluva, it'd be good to have some company, dunno when I'll be available - got a lot on for the rest of this month :???: Maybe early December?

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sun Feb 22, 2015 11:12 am

There's a 90 Brumby at PAP Kilsyth, I just had a look and picked up the tailgate. Everything is there except the stereo part of the lower dash - doors look pretty good, has A/C, quad headlights, full alloy front bar (slight dent in the bottom middle section). Has a canopy fitted, but the stainless around the bed is all there - not great nick though (the bit above the tailgate was gone). The red MY wagon is gone, everything else is just regular Liberty/Outback/ Forester/Impreza. The WRX is still there, but nothing I could see worth grabbing (turbo stuff all gone, front 4 pots gone).
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Green_eyed_liberty
Junior Member
Posts: 374
Joined: Wed Oct 05, 2005 10:00 am
Location: Gold Coast

Post by Green_eyed_liberty » Sun Feb 22, 2015 12:59 pm

has anyone had a look at the big wreckers South of Grafton? drove past there yesterday and looked like a huge amount of cars

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sun Feb 22, 2015 2:19 pm

Grafton, NSW ? Wrong state for this sub-forum.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Apr 09, 2015 2:00 am

Imlach's has changed. Now need to have your driver's licence scanned and leave your drivers licence IF you want to use a trolley.

There's an '82 four door leone auto there. I scored the 6 gauge cluster from it (and matching wiring/oil pressure unit). On the back seat I left the slanted console with the original radio in it if anyone is keen. It's grey in colour. I didn't have the inclination to buy it to sell on. And I wasn't the one that smashed up the instrument cluster surround, otherwise I'd have that as well!

There's also a rusted well abused brumby there too, not much left of it other than the stock gearbox.

I think from memory there were three L series there. One was definitely a series one touring wagon. I should've looked at the diff ratio but forgot :rolleyes:

I was after GenII bits from the dual range manual - the ones there were all bloody autos. Seemed like there was quite a number of GenIII's there, a few outbacks too. I remember seeing at least one Gen4.

Campbellfield had slim pickings - a lot of GenI's...
Kilsyth didn't have much in the way I wanted again. The brumby there was in better condition body wise but well stripped. Block and gearbox still there as were the quad lights. I'm now sort of regretting not getting the RED driver's door... will have to see what happens with my current one (it's not liking its window atm :()

Quite a number of Imprezas rocking up from various gen's.

I didn't get to Jolly's but will have to check it out next time if they've got what I want, that's primarily why I didn't go there...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Fri Apr 10, 2015 1:33 am

Hey Bennie, what was the front bumper like on the '82 sedan?
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Fri Apr 10, 2015 4:50 pm

sublime wrote:Hey Bennie, what was the front bumper like on the '82 sedan?
One nice big ding on the LHS from memory. A little rust too. Rear one was no better :(

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Fri Apr 10, 2015 7:54 pm

I've got a chrome 82 front bumper (no end caps) if you need it, it has a smallish dent that could be knocked out by a half-decent panelbeater (would need to be re-chromed though).
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Fri Apr 10, 2015 9:47 pm

Thanks dfoyl, I would have grabbed the one under discussion if it was in good nick but I really am chasing a all rubber 2wd version.
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sat Apr 11, 2015 2:56 pm

What's the difference between a 2wd and 4wd bumper? No over-riders ? I assume an all-rubber 2wd would be a tough one to find, only from an 1983 sedan or coupe (or base 2wd wagon, which would be even tougher).

I grabbed the slanted console today, along with the AC switch from the Brumby dash (going to use it for a light bar switch). I forgot to check the sedan for the wiper rotary switch, as these are perfect for Brumby's being upgraded to intermittent wipers (doesn't have the additional switch for the rear wiper like on the wagon, which is much more common)...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Sat Apr 11, 2015 3:24 pm

Dfoyl, re the intermittent wiper switch.........
Don't forget the wiper relay can of brains, if you go back for it!!
Sits back deep behind the fuse box :-)

Image

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sat Apr 11, 2015 6:00 pm

Yep, I know the bits needed - but those I can get from any MY wagon, it's the rotary switch off the sedan that is the tough part to find. I have one on mine, but always good to get a spare.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sun Jun 28, 2015 10:14 pm

Kilsyth PAP has a blue MY wagon, which I have removed the PS from. The (front) grille and air filter box has gone during the week but everything else is still there that I can see.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

Post Reply

Return to “Victoria”