Wreckers - what's there...
I haven't seen a decent long dash for a while, the few still around always are perished badly for the vents. Give John at Volks-Baru a try, he has a MY sedan out front for parts I believe.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
No, a Leone rear bumper is completely different in profile (sits too high), you need a USDM rear bumper or a AgQuip bar. eBay seller rebel2red happens to have one of the latter for sale (which is the first I've seen for a long time). I will have a spare USDM rear bar shortly (I am upgrading mine from a black to a chrome plated 1982 bar) but it is in need of some straightening.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
17-3 Imlachs :
1989 Brumby in white. Base model (single headlights), has had aftermarket nudgebar added. Front mudflaps, both damaged. Stainless trim damaged all round bed but good over windows. Pass-side taillight gone, drivers side damaged beyond repair. No AC, no PS, no intermittent wipers. Doors pretty good. A bit of rust in tray but otherwise decent. Ignition switch NG.
1989 Brumby in white. Base model (single headlights), has had aftermarket nudgebar added. Front mudflaps, both damaged. Stainless trim damaged all round bed but good over windows. Pass-side taillight gone, drivers side damaged beyond repair. No AC, no PS, no intermittent wipers. Doors pretty good. A bit of rust in tray but otherwise decent. Ignition switch NG.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.