Page 1 of 2
Centre Bearing Mount Riped From Floor
Posted: Thu Nov 22, 2007 5:14 pm
by 00outback
Noticed this today that I had riped the centre bearing mount from the floor. This is what happens after 4wding with Curlie.
[ATTACH]527[/ATTACH]
[ATTACH]528[/ATTACH]
Posted: Thu Nov 22, 2007 5:28 pm
by INEEDABEER
That's nothing you should see what happens when you go with Jan.
Posted: Thu Nov 22, 2007 8:30 pm
by vincentvega
you must have given that a good hit!
this is your liberty right?
Posted: Thu Nov 22, 2007 8:49 pm
by Alex
shezuz! musta hit it REAL hard!
alex
Posted: Thu Nov 22, 2007 9:44 pm
by stamp_licker
Were you driving like curlie?Shouldn't be to hard to fix.
Posted: Fri Nov 23, 2007 9:48 am
by BrennyV
ahahah nice, looks like some one gave it a good time
lets see some pix of the repair
Posted: Fri Nov 23, 2007 2:49 pm
by Captain Obvious
ouch!!!! steve not a hard fix can help yea some time if you like?? i take it you wont be bring that car down the beach??/
Posted: Sun Nov 25, 2007 7:43 pm
by yarney
Nice job Steve
i did the same thing except it was the front suspension lift blocks 2 of them:( all fixed now
Jan
Posted: Sun Nov 25, 2007 7:45 pm
by D3V1L
hahaha...if your gonna do it u may as well do it properly:P
dave
Posted: Sat Dec 22, 2007 8:35 pm
by 00outback
The Liberty is fixed
.
[ATTACH]595[/ATTACH]
Posted: Sun Dec 23, 2007 12:37 am
by Matatak
nice to see u replaced the Actual bearing to
Posted: Sun Dec 23, 2007 2:19 am
by AndrewT
Cool nice repair.
You may want to consider bracing it forwards and backwards to prevent this from happening again....a piece of flat bar angled down on both sides might do the job.
Posted: Sun Dec 23, 2007 7:16 am
by AlpineRaven
gee.. how did that happen? How did you attach back to the floor? Weld or what?
Cheers
AP
Posted: Sun Dec 23, 2007 8:52 am
by vincentvega
is that a brand new center bearing???
mine is stuffed, what did it cost?
Posted: Sun Dec 23, 2007 8:51 pm
by 00outback
The car was repaired under Insurance so the centre bearing was replaced and it was welded from the inside. The repairer said the centre bearing cost about $400 and I still have the old centre bearing.
Posted: Sun Dec 23, 2007 9:55 pm
by AlpineRaven
00outback wrote:The car was repaired under Insurance so the centre bearing was replaced and it was welded from the inside. The repairer said the centre bearing cost about $400 and I still have the old centre bearing.
Insurance? I didnt realise they do cover that kind of thing?
Cheers
AP
Posted: Sun Dec 23, 2007 10:32 pm
by vincentvega
very nice. who you insured with?
Posted: Sun Dec 23, 2007 11:10 pm
by 00outback
I'm insured with AAMI.
Posted: Sun Dec 23, 2007 11:39 pm
by Matatak
$400 !!!!!!!!!!
thats one HUGELY expensive bearing.
there aint much difference between that and others ive replaced which were only around the $100 mark.
but paying some1 usually means around 200..
thats crazy.
maybe its genuine. subaru sure like to charge for some stuff.
sorry i had to post that
Posted: Mon Dec 24, 2007 3:08 pm
by PeeJay
I don't suppose there is a similar aftermarket part?