The AUSubaru.com.au Forums

After 2 years behind an EJ20T my AWD dual range Lib box now has multiple bits of second gear scattered around inside it. The cause was towing a heavy trailer a few too many times rather than the usual overzealous launch. A tooth went first signified by a noise in second, till it finally all let go and low range 3rd had to substitute as second to get the car up the hill to home.

While it is out I am going to try to fit Lseries 3.7 1st and 2nd and RS 5th. so shorter gears at the start and taller at the end.

i dont think you can put lseries gears in a liberty bottom shaft the shaft size is differant

but rs 5th will fit

bugger Ian oh well an excuse to have a play keep us informed of how the l series bits go in the liberty box cheers Ben

L series 5th or RS Liberty 5th will fit in Dual Range box.
I am not sure, but I think I have read off from somewhere that 1 to 4th gears are same as L series in Liberty box. I could be wrong... Best way is to get L series box and Liberty box and measure all up.
Cheers
AP

unlucky ian...... bloody subaru boxes

i have a few boxes in peices at the mo if you need anything...
rex box, busted 4th, 3.9
L box, busted reverse, 3.9 dual range
also the remains after joing a box with busted 2nd to a box with busted 3rd