L-series front swaybar rubbers
Posted: Wed Nov 09, 2005 7:21 pm
to put replacement ones in do they need to be pressed in our can you just put em in with a bit of force?
Which ones?
The ones on the sway bay or the link?
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
L-series front swaybar rubbers
Page 1 of 1
Posted: Wed Nov 09, 2005 11:52 pm
Posted: Thu Nov 10, 2005 5:31 pm
the ones on the outside... ones that fit through the eye... think its the link
Posted: Thu Nov 10, 2005 6:17 pm
i will let you know i am hopping to put then on this arvo.Posted: Thu Nov 10, 2005 6:31 pm
no worries... pics would be sweet if you can take any...
if not dont worry.. How much were they>?
thanks
if not dont worry.. How much were they>?
thanks
Posted: Thu Nov 10, 2005 6:35 pm
Fulcrum neoprene kit (none of this standard crap)... Broke the bank at retail prices... $14 bucks.
Posted: Thu Nov 10, 2005 6:53 pm
The ones on the eye should just fold and push in.
Posted: Fri Nov 11, 2005 9:30 am
Yes they should. Scrap my last post once i got the bushes home (and the old 1's out... its that always the way) they were the wrong part (same size di. as the hole!?!?!) i am back there thisarvo so IF i get the right part (which i should as i have the old rubbers I'll post a part number for you.Jack_Sparrow wrote:The ones on the eye should just fold and push in.
Posted: Mon Nov 28, 2005 8:50 pm
Yep, I need to do this too. Mainly due to previous @#$^&@$& simply making some up from some pieces of rubber & didn't refit the metal sleeves around the bolts to stop you overtightening them.
Posted: Tue Nov 29, 2005 11:00 am
Sorry 4got about this thread 
The corr3ect part was much dearer then the initial part something like $30, to get the lil bugers in you need to apply the greese to the bushes and then use some force to get them into the eyelets, using either mulit-grips and/or a G clamp - expect em to flex and move around once u get it just the littelest bit in your away, then lube up the pin and inset it put back together and your done.
The corr3ect part was much dearer then the initial part something like $30, to get the lil bugers in you need to apply the greese to the bushes and then use some force to get them into the eyelets, using either mulit-grips and/or a G clamp - expect em to flex and move around once u get it just the littelest bit in your away, then lube up the pin and inset it put back together and your done.
Posted: Tue Nov 29, 2005 11:21 am
Part number?