EA82 carb bolt distances
Posted: Wed Nov 02, 2005 11:44 am
Does anyone have the exact distance between the bolts for an EA82 carb (ie the manifold holes for the carb)? I know this info used to be around, but I cant find it.
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
EA82 carb bolt distances
Page 1 of 1
Posted: Thu Nov 03, 2005 10:08 pm
Bump
Posted: Sat Nov 05, 2005 1:35 pm
81mm x 45mm. Measured from the middle of the studs.
Posted: Sat Nov 05, 2005 1:53 pm
so, not wishing to sound dumb, the 80mm x 43mm adaptor from Redline will not fit? If not, whats the correct Redline adaptor?
Posted: Sat Nov 05, 2005 2:05 pm
I measured that from the centre of the studs.
The adaptor you have may have been measured differently. Perhaps from the edge of the hole. It is only a couple of mm different so may be the correct one.
The adaptor you have may have been measured differently. Perhaps from the edge of the hole. It is only a couple of mm different so may be the correct one.