Anyone looking for parts from a 1975 Leone wagon

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Anyone looking for parts from a 1975 Leone wagon

Post by dfoyl » Thu Oct 08, 2015 8:31 pm

Just saw Imlach's in Dandenong have a 1975 Leone wagon in the yard, VIN A64010162XXXX. Anyone need parts from this generation ? Probably won't be there long...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Post by Bantum » Fri Oct 09, 2015 1:11 am

Got any photos ?

I'm after a windscreen for a '76 ...

Cheers, Bantum ...

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Fri Oct 09, 2015 7:27 am

I'll grab some on the weekend. I just saw it pop up yesterday (landed in yard on the 6th).
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sat Oct 10, 2015 2:13 pm

Image
Image
Image
Image
Image
Image
Image
Image
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sat Oct 10, 2015 2:14 pm

Image
Image
Image
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Post by Bantum » Sat Oct 10, 2015 11:16 pm

So how much do they want for it whole ? ( careful or willy will get it )

Cheers, Bantum ...

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sun Oct 11, 2015 6:24 am

Not sure if they sell the car whole, should be no reason why not. Probably would have to wait for the weekday guys to come in. Here are the details:
Imlachs Self Serve Auto Parts
Ph. 03 9547 7377.
My guess is trucking it up to NT would be scarily expensive...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Sun Oct 11, 2015 5:04 pm

Shame it is being parted out as it appears to be in quite respectable condition.

Not sure if they will sell it complete, a lot of wreckers refuse to do so once it has entered the yard.
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
El_Freddo
Master Member
Posts: 12503
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Mon Oct 12, 2015 8:20 am

Ask! Before the current owners they used to sell bodies for reshelling projects. The new mob might do the same so long as it's of a statutory write off.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
77Soob
Junior Member
Posts: 7
Joined: Thu Oct 08, 2015 8:10 pm
Location: Altona Meadows, VIC

Post by 77Soob » Thu Oct 15, 2015 3:53 pm

Hey guys, I had to grab a few bits from her for the '77 wagon I'm trying to get roadworthy. I had a close look at the windscreen for you, it's got a couple of stone chips that would fail RWC (in VIC at least). The windows in the doors are quite badly scratched from rubbing against the winding mechanism, but the panels look pretty decent and not too rusty.

User avatar
77Soob
Junior Member
Posts: 7
Joined: Thu Oct 08, 2015 8:10 pm
Location: Altona Meadows, VIC

Post by 77Soob » Thu Oct 15, 2015 3:59 pm

Here's what's left...

Image

Image

Image

Image

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Thu Oct 15, 2015 4:56 pm

What parts did you grab 77soob?

Seriously, there is no need to use secondhand windscreens when you can still buy them new.
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Thu Oct 15, 2015 4:58 pm

Nevermind 77soob, I can see the pics!
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Thu Oct 15, 2015 8:01 pm

Oh yeah... Someone has a red wagon then!
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Going ...

Post by Bantum » Fri Oct 16, 2015 3:04 am

77Soob wrote:Hey guys, I had to grab a few bits from her for the '77 wagon I'm trying to get roadworthy. I had a close look at the windscreen for you, it's got a couple of stone chips that would fail RWC (in VIC at least). The windows in the doors are quite badly scratched from rubbing against the winding mechanism, but the panels look pretty decent and not too rusty.
Thanks,

I would still grab the windscreen ( as its better than none atm ) & keep it as a spare - How much do they want for it ?

P.S. - I'm in Brisbane, but my '76 wagon is still in Darwin ... ;)

Cheers, Bantum ...

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Fri Oct 16, 2015 6:12 am

Front windscreen is $40.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Post by Bantum » Fri Oct 16, 2015 11:54 am

Was thinking of doing this to mine :

Image

More info here : showthread.php?t=22649

That would be good for cutting up & spare bits ( but I don't have the time / money for it atm )

Does some one want to try it out ? ( Or at least save it from the scrappers, will need somewhere to stash it for a while )

Cheers, Bantum ...

User avatar
77Soob
Junior Member
Posts: 7
Joined: Thu Oct 08, 2015 8:10 pm
Location: Altona Meadows, VIC

Post by 77Soob » Fri Oct 16, 2015 3:11 pm

Yup, found a guy here in Melbourne who will do a brand new windscreen installed for $180 so they must still be in stock.

I've ordered the rubber for it from a bloke in Brissy- he's got a few of them but no chrome inserts:
http://www.ebay.com.au/itm/SUBARU-LEONE ... xgWAFeDyPw

Bantum- nice sketch, looks like a cool project! Unfortunately I don't have the space or I would have loved to rescue it whole.

Sublime- I needed a new window regulator since mine is rusted out but ended up taking the whole door. Also got some handy spares like the tail lights that would be a pain to track down if they ever got cracked. Was stoked to find the original grille for mine (someone had swapped in an 80's one) and the rear wiper that was missing :-)
1977 Subaru 1600 DL Wagon, 2006 Forrester XT

Post Reply

Return to “Subaru Chat”