The AUSubaru.com.au Forums

Hi all,

As the title says I would like your suggestions as to the best way to hold a canopy onto a brumby, preferably in a way so that it can be easily removed if needed. All ideas and help gratefully received.

Thanks,
Dave.

Mine was mounted in a way indicating no one really cared that the stainless steel mouldings were drilled through, partly up the back of the pillar. Forgotten how the back section was secured. I fitted can'o'pee to my other ute with fence wire, tensioned up and crimped, using the internal tie points - noice and secure !

Good old number 8 fencing wire, will fix anything from a fence to a battle cruiser & now it seems a Brumby

latch clamps?

or as called on Ebay clamp latches

http://www.ebay.com.au/sch/i.html/_W0QQ ... m270.l1313

I would say the one in each corner on the inside (4 all up) would hold it in place rather well.

TOONGA

Hmmm might give the fencing wire a miss . Those latch clamps look like the way to go thanks Jules

I like the latch clamps too. Those S/S set of 4 look good, just depends on the size of them