Page 1 of 1
subaru wiring
Posted: Sun Oct 13, 2013 12:28 pm
by sk1994
hey guys , im pulling out the engine in my 1993 subaru legacy
and getting the engine put in my 1996 subaru liberty , will i need to pull the wiring out of the legacy to ? or is it the same in the liberty
thanks
Posted: Sun Oct 13, 2013 2:48 pm
by RSR 555
Hi and Welcome,
Firstly we are going to need to know what engine is in the Legacy and what engine is in the Liberty?
Liberty is the Australian version of the worldwide Legacy. Both cars are available in many different engine configurations.
Cheers,
Paul
Posted: Sun Oct 13, 2013 4:22 pm
by sk1994
the engine in the legacy is a EJ20 "turbo'd" , and the engine in the liberty is a EJ22
Posted: Sun Oct 13, 2013 9:34 pm
by RSR 555
Ok the 1993 Legacy is an RS Turbo. This has the EJ20G engine and has a completely different wiring loom to the 1996 Liberty EJ22 engine. It can be done as the engine can swap over but you'll need a lot of other parts than just the engine, i.e. crossmember, exhaust, ECU, etc.
I'd suggest you buy a 1996 WRX 1/2 cut as this is a lot closer to your car.
Posted: Mon Oct 14, 2013 5:21 pm
by sk1994
cheers for the help