Loving the new motor :)

Mitchhsj · Post by **Mitchhsj** » Sat Aug 24, 2013 8:34 pm

Just a update on the wagon. The ea82t is in and running well now with the inter cooler , bigger fuel system and some more boost... Untouchable up the beach.. It's amazing what a bit of fuel injection and a little turbo does

my good mate and I are halfway doing the same thing to his brumby.. Should be up and running soon..

Mitchhsj · Post by **Mitchhsj** » Sat Aug 24, 2013 8:39 pm

A pic:D

Mitchhsj · Post by **Mitchhsj** » Sat Aug 24, 2013 8:40 pm

Another

Mitchhsj · Post by **Mitchhsj** » Sat Aug 24, 2013 8:42 pm

Under bonnet

steptoe · Post by **steptoe** » Sun Aug 25, 2013 8:24 am

FMIC install looks tidy. The throttle body top is usually not a snug fit with standard imperial silcone bits ...what size did you use and hows it fit nice and tight ? Sneaky snip and good clamp? What boost pressure on the cool sode of the IC ?

NachaLuva · Post by **NachaLuva** » Sun Aug 25, 2013 8:57 am

Very nice install

Looks like a full body lift kit?

Johnny T · Post by **Johnny T** » Sun Aug 25, 2013 11:33 am

Looks great, it must sound great when the turbo is boosting

Do you have any other plans for it?

Post by **Alex** » Mon Aug 26, 2013 8:48 am

first ea82t ive seen with a FMIC!

clean install, awesome!

Mitchhsj · Post by **Mitchhsj** » Mon Aug 26, 2013 7:13 pm

Thanks guys, the throttle body is 2.25 inch and my piping is 2.5 so a good clamp its fine. It's running 9 pound happy as.. I have I
Only ever had the piping pop off once and that was up the beach right in the cutting, so I had so stop:( witch sucked because I love flying passed all the bogged 4x4s and blowing them all away.. And it popped off the turbo because its a joiner over a joiner but hasn't botched me since.. Yea it's a 3inch body lift with another 1.5 in springs so 4.5 all up... Spent the day on the brumby wiring soo close just haven't got spark yet hard blending 1.5 looms to make one efi one

Mitchhsj · Post by **Mitchhsj** » Mon Aug 26, 2013 7:18 pm

Rear view

Mitchhsj · Post by **Mitchhsj** » Mon Aug 26, 2013 7:28 pm

Fixing some panels up and reprinting the car the same colour so it's nice and clean, also rue do the window tint. And if I feel like it down the track a ej20t but I, going to see how much I get out of this motor