Page 1 of 1
Need gearbox linkage for WRX
Posted: Thu Feb 21, 2013 4:57 pm
by niterida
need number 2,3,7 & 8 in the following pic. Anybody know if I can get aftermarket ones or do I have to buy from Subaru $$$$$.
Posted: Thu Feb 21, 2013 5:12 pm
by tambox
Aren't these the same as liberty/forestor/outback, depending on the year, wreckers?
The only bits that wear are the bushes, Subaru $$$
Posted: Thu Feb 21, 2013 5:20 pm
by niterida
tambox wrote:Aren't these the same as liberty/forestor/outback, depending on the year, wreckers?
The only bits that wear are the bushes, Subaru $$$
some are the same - some are different. I have a 2011 WRX shifter to go in my RS and the RS is completely different and the WRX shifter didn't come with these bits and neither did the STi gearbox and the nearestSubaru dealer is 420kms away
Posted: Thu Feb 21, 2013 5:31 pm
by tambox
Sounds like fun
The problem with linkage you have shown, is you can only replace on bush set, and they both wear.
The Pin (3) should be the same for any of them.
The bolt and nut should be universal.
The size of 8 varies, I have a few, but the bushes are slightly worn.
Posted: Fri Feb 22, 2013 11:49 am
by RSR 555
I'll have a look for you Ken
Posted: Fri Feb 22, 2013 12:15 pm
by steptoe
err, cough * ....where's my bloody want ad ???
I am after the whole lot of levers from Impreza of some sort to fit to a Vortex AWD in a Brumby