96 Outback auto intermittent stalling

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
benmacd
Junior Member
Posts: 2
Joined: Tue Feb 05, 2013 2:45 pm
Location: Ringwood

96 Outback auto intermittent stalling

Post by benmacd » Tue Feb 05, 2013 3:37 pm

Hi,

I'm having intermittent issues with my 96 Outback limited auto.
At random times while driving or idling, it may stall.
Sometimes it'll start right up, others it'll take a few tries, and when that happens, giving throttle won't do anything to keep revs up.
When it dies, the revs will just drop, power steering goes, like when the key's at second stage before you turn on the motor.

I've made a thread in another site:
http://www.subaruoutback.org/forums/66- ... dying.html

This has all the info so far.

Tomorrow, I'm getting the crank sensor changed. And apparently the mechanic cleaned the IAC and EGR valve and it ran fine, but whether it was just not stalling or it's fixed I don't know.

Any info is hugely appreciated, havn't had the car for almost 2 months now, I need it for work.

Cheers all

User avatar
tex
Junior Member
Posts: 553
Joined: Tue Jul 24, 2007 9:42 pm
Location: OUTSIDE Canberra!
Contact:

Post by tex » Tue Feb 05, 2013 8:52 pm

Sounds more like the MAF sensor to me, Someone please correct me if im wrong!
87 targa brumby (Neglected),
92 targa brumby (weekend runabout),
97 Lifted Outback (Dailey drive),
05 outback safety (Too cheap to pass up),
90 model liberty (was to be scrapped instead sold to workmate)
+ others.

User avatar
benmacd
Junior Member
Posts: 2
Joined: Tue Feb 05, 2013 2:45 pm
Location: Ringwood

Post by benmacd » Wed Feb 06, 2013 8:18 am

I thought of that, I tried tapping it while the car was on, and tried unplugging it when the car was on- tapping did nothing, and unplugging it killed the car right away.
Would this mean it's working as it should?

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Tue Feb 12, 2013 4:00 pm

It should cause the car to stall if unplugged but this doesn't mean it's working 100% correctly. Try finding someone closeby with the same car and swap items around one weekend and see how things go
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Tue Feb 12, 2013 4:47 pm

Are the airhoses connected from manifold & engine to the airbox pipe?
I would swap the MAF sensor from another Subaru also ignition module as well.
Since you're in Ringwood - theres another outback sitting there with complete as i checked last friday - grab parts there.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
Couple7
Junior Member
Posts: 1
Joined: Sat Feb 16, 2013 11:12 am
Location: NSW

Post by Couple7 » Sat Feb 16, 2013 11:50 am

Hi.
Had the same problems with my 98 RX (same motor) Has been getting slowly worse over the past couple of months, now undriveable. After much research decided to bite the bullet and buy a new MAF sensor. Less than $100 including overnight delivery. Magic all fixed, drives like a dream.
Tried cleaning it first to no avail. Best $100 I ever spent. Took all of five minutes to change.
Chris.

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Sat Feb 16, 2013 2:03 pm

Couple7 wrote:Hi.
Had the same problems with my 98 RX (same motor) Has been getting slowly worse over the past couple of months, now undriveable. After much research decided to bite the bullet and buy a new MAF sensor. Less than $100 including overnight delivery. Magic all fixed, drives like a dream.
Tried cleaning it first to no avail. Best $100 I ever spent. Took all of five minutes to change.
Chris.
Cant really clean them as they are the most sensitive part.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sun Feb 17, 2013 12:50 am

AlpineRaven wrote:Cant really clean them as they are the most sensitive part.
Cheers
AP
I agree with AP, these Air Flow Meters don't like cleaning fluid. I'd try a good known one.

I'd also look at replacing both Crank Angle Sensor and Cam Angle Sensor
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

Post Reply

Return to “Subaru Chat”