Page 1 of 1
Whats ths ECU from?
Posted: Mon Sep 03, 2012 9:08 pm
by SuBaRiNo
Is there anyway of finding out what model and/or year an EJ ECU is from?? I belive its a JDM ECU.
Numbers on it are...
8W
22611 AD440
MECF-B102 C3 7728
Dave
Posted: Mon Sep 03, 2012 9:20 pm
by El_Freddo
Frog might be able to help out here. I know he's usually after the VIN but hopefully he can work back from these numbers...
Cheers
Bennie
Posted: Tue Sep 04, 2012 3:32 am
by 90brumby
The numbers in google bring up this there not 100 percent the same but very close . For a ej16
http://forums.aussieveedubbers.com/view ... ?tid=65188
Posted: Tue Sep 04, 2012 7:47 am
by FROG
Description says manual transmission 1.6 litre - not sure if this is correct though
Retails for $2700
Posted: Tue Sep 04, 2012 8:00 pm
by SuBaRiNo
Thanks guys. That's what I was afraid of.
Dave
Posted: Tue Sep 04, 2012 8:11 pm
by SuBaRiNo
Am I right in assuming this is single point injection. It's lacking lots of wiring.
Dave
Posted: Wed Sep 05, 2012 12:42 am
by TOONGA
Dave do you need one or are you trying to cut the loom down. I have an EJ16 at Pauls workshop with the loom and it is a MPFI motor.
TOONGA
Posted: Wed Sep 05, 2012 11:39 am
by RSR 555
SuBaRiNo wrote:Am I right in assuming this is single point injection. It's lacking lots of wiring.
Dave
Hey Dave, The first model Impreza (I think it was 1993) was available in Australia was a 1.6 manual or 1.8 auto. Both of these were MPFI engines but the EJ16 had a very weird throttle body setup, this could explain the differences in the amount of wires.
I'm so glad you love wiring.. saves my head from exploding
