gear box out question

grytvikken · Post by **grytvikken** » Mon Apr 10, 2006 10:03 pm

got to swap gear box's on the L-Series wagon and im thinking do it without pulling the motor.......am i a looney for doing it this way or should i just whip it out still attached to the engine?

stinky · Post by **stinky** » Mon Apr 10, 2006 10:05 pm

Nah just stick a trolley jack under the gearbox unbolt it, wiggle it out and drop the trolley jack, stick the next gearbox on the trolleyjack and do the opposite.

I've done it before ( with help ) that way, and know of others who have done it as a one man job.

Suba · Post by **Suba** » Mon Apr 10, 2006 10:41 pm

When I replaced the gearbox after it only being in for a week I pulled the whole motor and box out agaiin to do it , makes it easier to line in the box in my oppinion.

Mike.

BaronVonChickenPants · Post by **BaronVonChickenPants** » Mon Apr 10, 2006 10:53 pm

If you have or have access to an engine hoist, block and tackle, etc, pulling the engine out is hands down the easiest way to do it BUT if you don't have access to these things then do it as stinky has said.

I've done it both ways and think buying my engine hoist was $300 very well spent.

Jordan.

stamp_licker · Post by **stamp_licker** » Tue Apr 11, 2006 7:27 pm

done it a few times with motor in and trolley jack[big one] by myself.