Wrecking 1989 Subaru Vortex

H-top · Post by **H-top** » Wed Dec 08, 2010 10:47 am

Ok, I've got the vortex at the workshop and stripping
it out and it has to go by Thursday .

So post you lists of what you want from the
car and we can sort out a price IF ANY.

All parts are available, the gearbox and engine are already out

other parts of interest are the disc rear kit
with new discs and bendix pads with only 200kms

put all orders in ASAP or it will be scrapped

Cheers all

RSR 555 · Post by **RSR 555** » Wed Dec 08, 2010 11:20 am

Very sad to hear but do you have the left and right door mirrors?

78sti · Post by **78sti** » Wed Dec 08, 2010 11:37 am

How much for the rear trailing arms?

guyph_01 · Post by **guyph_01** » Wed Dec 08, 2010 1:56 pm

I need the
-plastic surround around the speedo and middle air vents
-Radiator

If the car was in WA id take the whole interior to swap from my brown colour to the blue/black colour of your:(
Would you be able to post some pics of exterior and interior of the car?

ww1313 · Post by **ww1313** » Wed Dec 08, 2010 3:39 pm

Need fuel pump and relay

H-top · Post by **H-top** » Wed Dec 08, 2010 5:13 pm

Very sad time

$40 for mirrors

$100 for trailing arms

$15 for vents

$30 for pump, relay is in the loom going with engine

Dash surround is gone as it's rooted
radiator is rooted

cheers

guyph_01 · Post by **guyph_01** » Wed Dec 08, 2010 5:39 pm

Shame im not in perth, I can't inspect my car to see if i need anything:(

Hummm lets see;
How much for the cluster?
I need the coolant sensor on the rad.
I need the high beam control switch

Thats all i can think of for now:P

H-top · Post by **H-top** » Wed Dec 08, 2010 5:43 pm

I used an old Holden style switch as the high beam was
dead

$120 for cluster and I'll give u the sensor for free

RSR 555 · Post by **RSR 555** » Wed Dec 08, 2010 5:46 pm

H-top wrote:Very sad time

$40 for mirrors

cheers

Hey Sam, please consider these sold.. I'll send you a PM

Cheers,
Paul

guyph_01 · Post by **guyph_01** » Wed Dec 08, 2010 6:08 pm

Is it common that those high beam switch fail?

I definately need the coolant sensor but not sure on the cluster. Plz keep only the sensor for me.
thx

FujiFan · Post by **FujiFan** » Wed Dec 08, 2010 7:19 pm

Shame its come to this:(
Do you still have the gearbox and if so, what are the specs/$$ please?

H-top · Post by **H-top** » Wed Dec 08, 2010 7:39 pm

Huge shame Mate!

It's a 1989 Subaru AX-7 fulltime AWD with selectable centre difflock
it comes with difflock solenoid, shifter
rods and shifter, wiring, gearbox mounts and crossmber.

A complete kit!

the gears are pretty short

These almost never come up and are not getting any more common

I was gentle with it because I knew I would not be able to replace it

$875 is what I want for it.

Cheers

spidersubaru · Post by **spidersubaru** » Wed Dec 08, 2010 7:41 pm

how much for rear disks?

H-top · Post by **H-top** » Wed Dec 08, 2010 7:48 pm

$350 for the kit as they are in near new cond

cheers

FujiFan · Post by **FujiFan** » Wed Dec 08, 2010 7:51 pm

thanks H-top, sounds like just what im after. Would idealy like D/R but could be quite happy in the mean time with that unit until I can mix n match! reasonable price considering comprehensive components to be supplied with. definatley worth a drive (a looonnng drive @ that) to collect.

H-top · Post by **H-top** » Wed Dec 08, 2010 7:53 pm

very long drive lol it is Single range by the way

FujiFan · Post by **FujiFan** » Wed Dec 08, 2010 7:56 pm

Thats cool, 4got to ask if 3.7 or 3.9 front diff? can go either way!

H-top · Post by **H-top** » Wed Dec 08, 2010 8:07 pm

3.7 nearly only available in that, 3.9 in us

FujiFan · Post by **FujiFan** » Wed Dec 08, 2010 8:24 pm

Can I PM you about this?

H-top · Post by **H-top** » Wed Dec 08, 2010 8:26 pm

Pm away