Anyone in Townsville Qld

Post by **TOONGA** » Sat Nov 06, 2010 12:18 pm

good to hear Dave and I do hope that the exhaust gases clear up

TOONGA

Point · Post by **Point** » Sat Nov 06, 2010 1:14 pm

No problem at all Dave, I was glad I could help. It was great to meet you guys, and i quite enjoyed the day. I hope that ball joint isn't too bad. If you want to change it you're more than welcome to come over again.

Matt. I think we should have a bit of a get together, even if we just meet on the strand or go find a nearby track for a drive. I have another mate with a lifted MY that I will try to get to come along too. Who else is around? I haven't seen Brumby Boy post on here in a while.

sven '2' · Post by **sven '2'** » Sat Nov 06, 2010 1:52 pm

Dave,

If coming back thru Adelaide, give us (the SA crew) a shout.

Hopefully just for a pint or two, but if repairs are needed, I'm sure we can sort you out.

Sven

Matt · Post by **Matt** » Sat Nov 06, 2010 6:56 pm

There is a few still around, Brumby Boy is around matter fact he was around the other day when Dave called around. I am happy to have it my place, just need to sort out a weekend.

Dave i glad we could help, even in a small way, Have a safe trip and keep us posted.

Matt · Post by **Matt** » Sat Nov 06, 2010 6:57 pm

Also s the lifted MY the red and grey one, with roof racks??

Point · Post by **Point** » Sun Nov 07, 2010 12:37 am

that's the one!

olddog642 · Post by **olddog642** » Sun Nov 07, 2010 1:17 am

If you are coming through Canberra give us a call I'm sure a barbie could be arranged.
Hylton

YouTube · Post by **El_Freddo** » Sun Nov 07, 2010 3:41 pm

Good stuff guys! Glad you got it sorted Dave. I first heard about this on bookface...

How was the hub stuffed? I'm guessing the bearing running surface was chewed out or something of the like.

Gotta love the subi community! Keep up the good work.

Cheers

Bennie

Point · Post by **Point** » Mon Nov 08, 2010 3:33 pm

if you look at the pic I posted, the inner bearing race is the collection of bits, and that is supposed to press onto the exposed part of the hub next to it. The inner race of the outer bearing is still on the hub, as i couldn't get it off. If you look at the hub, it has a lip on the end, and that is not supposed to be there, but is meant to be a constant diameter. The new bearing had probably 1mm of clearance instead of being a press fit.

Post by **Alex** » Mon Nov 08, 2010 4:10 pm

good on ya guys.

what a great family the subaru one is!

Just goes to show ya there are still some great people in the world....and they all drive subarus!

alex

Brumby Boy · Post by **Brumby Boy** » Fri Nov 12, 2010 6:48 am

yea guys im still around, i dont get on here much any more since my utes off the road. Been hanging out at ozfoz since i got my MY 09 foz XT.

It was good to meet you dave ive been wanting to come over for a holiday in my ute and go playin with you guys. I'm glad we could be of assistance to you while you were over here. And just think if you handnt broken you never would have found we were up here lol

i think a bbq is a good idea. Im happy to have it at my place then everyone can see the progress or lack there of on my brumby

Levy · Post by **Levy** » Mon Dec 05, 2011 3:50 pm

Hi gang, I'm in the T'ville area and my 99 outback desperately needs a service. I was wondering if anyone could tell me of where I should take her or if you could help me out. Any advice would be appreciated, cheers, Carl.

Matt · Post by **Matt** » Mon Dec 05, 2011 10:48 pm

G'day Carl,

There is quiet a few of us here in the ville. Check your PM's.

Cheers
Matt

randomman · Post by **randomman** » Tue Dec 06, 2011 11:40 pm

Dynolink is the correct name for Vern Crawfords bussiness on Civil Rd and the phone number is 4755 0000.