Well Cylinder
Posted: Thu Mar 09, 2006 6:53 pm
Please someone tell me what calibre(internal) has well cylinder for subaru Leone, 1986, sedan, EA82. I thing my local dealer tell me there is 17.5 mm...Is correct?
Thanks.
Thanks.
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
Well Cylinder
Page 1 of 1
Posted: Thu Mar 09, 2006 7:11 pm
You mean the internal diameter of the rear wheel cylinders? 17.5mm sounds about right to me, I'd have guessed 5/8" but being a Japanese car most of it is metric.
Posted: Thu Mar 09, 2006 7:29 pm
You mean the internal diameter of the rear wheel cylinders?
Yes....10x
Yes....10x
Posted: Thu Mar 09, 2006 7:34 pm
Out of the US FSM-:
Effective Cylinder Diameter for 4 door sedans (4WD and FWD) on the rear is indeed 17.46mm
Effective Cylinder Diameter for 4 door sedans (4WD and FWD) on the rear is indeed 17.46mm
Posted: Thu Mar 09, 2006 9:01 pm
LOL. Or 11/16" on the dot.
Wasn't far out for a guess.
Wasn't far out for a guess.
Posted: Thu Mar 09, 2006 9:14 pm
Can I have that FSM manual???please...Fang wrote:Out of the US FSM-:
Effective Cylinder Diameter for 4 door sedans (4WD and FWD) on the rear is indeed 17.46mm
Posted: Fri Mar 10, 2006 5:47 am
To put it nicely - nobella wrote:Can I have that FSM manual???please...
Check on Ebay - there was a set selling in France recently
Posted: Fri Mar 10, 2006 4:44 pm
10x allotFang wrote:To put it nicely - nobella wrote:Can I have that FSM manual???please...
Check on Ebay - there was a set selling in France recently