Page 1 of 1
Ea81 keeps killing dizzy's
Posted: Mon Jul 13, 2009 11:00 pm
by ur a bus
Hows it going all
My ea81 keeps killing distributers on my 4th now and as just died have changed all leads spark plugs and coil but still it died. It is running a big cam could this be the reason for the trouble. I have tried to find a new one on the net with out any success any idea's? Or does any one have any good second hand ones.
cheers chris
Posted: Mon Jul 13, 2009 11:05 pm
by Battlewagon
What damage is happening to the dissy?
Posted: Mon Jul 13, 2009 11:16 pm
by ur a bus
It starts missing on cyliders at high revs then right through the rev range. Then its good for a bit then go to start it one mornin and nothing.
Posted: Mon Jul 13, 2009 11:18 pm
by ur a bus
Not sure what the damage would be?
Haven't had a good look always had spares till now.
Posted: Mon Jul 13, 2009 11:22 pm
by TOONGA
what is happening to the dizzy is it a complete destruction or is the gear being destroyed by the engine?
ebay has one but its not cheap and in America mind you it is a electronic ignition one
http://cgi.ebay.com/ebaymotors/Ignition ... ccessories
TOONGA
Posted: Tue Jul 14, 2009 10:45 am
by steptoe
are you a young un of our society that has grown up in a throw away society? You no say what type of dizzy whether it is kettering or electronic. Both have replaceable components. Kettering you can buy contact points, condensor and points file set using feeler gauge and or dwell meter. The electronic has a module that can be sourced from parts joints I hope or Subaru.
What you got? Any visible damage?
Posted: Tue Jul 14, 2009 11:15 am
by Phizinza
Does your coil have the resistor?
Posted: Tue Jul 14, 2009 11:32 am
by AlpineRaven
what "high" revs are you talking about?
Cheers
AP