Hatchie takes a hit. :(
- cooloothin
- Junior Member
- Posts: 184
- Joined: Tue Dec 06, 2005 10:00 am
- Location: Canberra, ACT
Send the $$ with western union.
Takes 2 minutes @ a travel agent or a bank, they are everywhere in the States and its instant.
Get him to buy a cheap camping matress (high density foam),
wrap it and tape it in that.
I would be sandwiching it between plywood too.
Good luck Mate.
Takes 2 minutes @ a travel agent or a bank, they are everywhere in the States and its instant.
Get him to buy a cheap camping matress (high density foam),
wrap it and tape it in that.
I would be sandwiching it between plywood too.
Good luck Mate.
1989 Subaru WonderBrumby II
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
WINDOW ARRIVED TODAY... pleased to report it is actually in better condition than my old one... just needs some tint and it's better than ever.
Dave
Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.
and the wa ausubaru sticker and offroad sticker
no more subarus
[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9
[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9
Yeah... lucky i have times when im smart and i did infact order an extra WA Subaru sticker when i originally got them.
Dave
Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.
i went to MANY window/glass places and was told the same thing from all of them...
1. They can't bend glass
2. They can't just drill holes in glass wherever they want for the mounts.
Dave
1. They can't bend glass
2. They can't just drill holes in glass wherever they want for the mounts.
Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.
- BaronVonChickenPants
- General Member
- Posts: 1187
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Nowra, NSW
Glad to hear it finally all worked out.
During mechanics at school I saw a documentary on how windscreens are made, any holes, curves, bends need to be in place in the initial stages of manufacturing, once it's tempered you can't do a thing with it.
Jordan.
During mechanics at school I saw a documentary on how windscreens are made, any holes, curves, bends need to be in place in the initial stages of manufacturing, once it's tempered you can't do a thing with it.
Jordan.
To become old and wise, first you must survive being young and dumb.
I used to work in a door window screen printers (fake leadlighting), we also bent glass in metal molds for stereo cabnets.
You can untemper glass but it becomes very firey and harder to work with, and would probably explode if you tried to temper again. We occasionally untoughed glass if we wanted to cut it down any, by just letting it bake in the kiln with the printed glass.
You can untemper glass but it becomes very firey and harder to work with, and would probably explode if you tried to temper again. We occasionally untoughed glass if we wanted to cut it down any, by just letting it bake in the kiln with the printed glass.