97 impreza ej16 cam bolt torque

apfreds · Post by **apfreds** » Wed Jul 24, 2013 10:57 pm

I removed both cam pulleys to replace the cam seals on my 97' Impreza ej16 & now I'm looking all over Google/Youtube & can not for the life of me find the Torque settings for the cam pulley bolts, I have the FSM's for both 93-96 & 97-98 Impreza's, but they only give me DOHC torque info, please help, It's getting late and I want to finish installing my timing belt tonight.

cheers, Aaron.

also if there's a pdf download somewhere with SOHC diagrams, that would be amazing.

YouTube · Post by **El_Freddo** » Wed Jul 24, 2013 11:14 pm

I'd say that the torque specs for the DOHC cams will be the same as the SOHC.

I've not gone with torque specs other than "really tight" with a socket and breaker bar...

Cheers

Bennie

apfreds · Post by **apfreds** » Thu Jul 25, 2013 12:15 am

thanks El_Freddo for replying,

I was thinking that, I found the torque settings for the 1.8 sohc, just going to go with that, throwing on a bit of permatex threadlock to make sure too.

you don't by any chance know the crank bolt torque for the 1.6? that will be my next mission.

YouTube · Post by **El_Freddo** » Tue Jul 30, 2013 7:29 pm

If you have a haynes or gregory's manual it'll be in there

I don't know where mine is so I can't do a quick reference for you...

Cheers

Bennie