Need gearbox linkage for WRX

niterida · Post by **niterida** » Thu Feb 21, 2013 4:57 pm

need number 2,3,7 & 8 in the following pic. Anybody know if I can get aftermarket ones or do I have to buy from Subaru $$$$$.

tambox · Post by **tambox** » Thu Feb 21, 2013 5:12 pm

Aren't these the same as liberty/forestor/outback, depending on the year, wreckers?
The only bits that wear are the bushes, Subaru $$$

niterida · Post by **niterida** » Thu Feb 21, 2013 5:20 pm

tambox wrote:Aren't these the same as liberty/forestor/outback, depending on the year, wreckers?
The only bits that wear are the bushes, Subaru $$$

some are the same - some are different. I have a 2011 WRX shifter to go in my RS and the RS is completely different and the WRX shifter didn't come with these bits and neither did the STi gearbox and the nearestSubaru dealer is 420kms away

tambox · Post by **tambox** » Thu Feb 21, 2013 5:31 pm

Sounds like fun
The problem with linkage you have shown, is you can only replace on bush set, and they both wear.
The Pin (3) should be the same for any of them.
The bolt and nut should be universal.
The size of 8 varies, I have a few, but the bushes are slightly worn.

RSR 555 · Post by **RSR 555** » Fri Feb 22, 2013 11:49 am

I'll have a look for you Ken

steptoe · Post by **steptoe** » Fri Feb 22, 2013 12:15 pm

err, cough * ....where's my bloody want ad ???

I am after the whole lot of levers from Impreza of some sort to fit to a Vortex AWD in a Brumby