engine mounts

khanacross · Post by **khanacross** » Wed Apr 21, 2010 2:25 pm

hi guys ,im in the newcastle area and looking to buy engine mounts for my ej22 into brumby conversion (just standard liberty mounts) ,anybody recommend a place to buy either new or good second hand ? so far ive been qouted 100 each ..is that about right ? thanks
khanacross

Post by **Alex** » Wed Apr 21, 2010 2:40 pm

i got some sti mounts for my conversion as i was breaking them all the time. Much stiffer and stronger. Try and get square mounts if you can, round ones are crap in my opinion.

alex

RSR 555 · Post by **RSR 555** » Wed Apr 21, 2010 2:52 pm

yep.. round ones are oil filled and because of the different angles of the EA and EJ mounting spots then you'll be going through heaps of them. I'd also recommend the square type and try and make the mount fit at the correct angle. Some people have used the wedges to get them right.

Post by **Alex** » Wed Apr 21, 2010 2:54 pm

i filed out the xmember holes where the mounts bolt up and all was good.

alex

Post by **yarney** » Wed Apr 21, 2010 3:07 pm

I got some sti mounts from MRT they are in Sydney but they will post very good price too they are new

Jan

khanacross · Post by **khanacross** » Wed Apr 21, 2010 9:17 pm

thanks for replies ,,,,the sti ones you recommend ,what year model? and do you remember the price ? thanks

Post by **yarney** » Fri Apr 23, 2010 6:57 pm

khanacross wrote:thanks for replies ,,,,the sti ones you recommend ,what year model? and do you remember the price ? thanks

No sorry don't remember give them a call i spoke to them and he just sent me the right ones the price was a lot cheaper than Subaru

http://mrtperformance.com.au/

Jan