lamborghini-subaru

SCOOBIDOO · Post by **SCOOBIDOO** » Fri May 29, 2009 3:55 am

Here is some of my daily Grind to share....
I recently did a comprehensive inspection report on a lambo kit car, which had a 300hp v8 fitted, and a stall of around 3500rpm..
And guess what gearbox was used, look closely, thats right, a Subaru Leonie 3 speed auto with a modified bellhousing .

The road test .... It handle the power no problem, the internal,s were fully reconditioned,but still they are very tiny inside.
None the less, proving they are a mighty little transmission.....

Number plate,s read "WOT-THE"

seagull · Post by **seagull** » Fri May 29, 2009 9:09 pm

I have built these gear boxes with Albins gears inside, dont worry it will go bang very soon !
they are Not that strong

seagull · Post by **seagull** » Fri May 29, 2009 9:13 pm

Now , this a 1600 cc auto as well . Extra clutch pack , plates ground on a light band surface grinder . The Ej20 n/a puts out just over 100hp , no skids > just the wheel in the air ~ !

d_generate · Post by **d_generate** » Sat May 30, 2009 1:22 am

Would someone please buy that horrid thing off Seagull, every time I go to his place I have to look at it.........YUK!!!!!!!