Brumby Windscreen Seals

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
RX Coupe
Junior Member
Posts: 65
Joined: Mon Jun 16, 2008 8:07 pm
Location: S.A.

Brumby Windscreen Seals

Post by RX Coupe » Mon May 18, 2009 6:40 pm

Hi all,

Decided today to clean up the interior of the Brumby as it badly needed it and also to repair the wiring for the interior light and resecure the back interior panel. I found that water had been leaking into the car from the rear window and also the windscreen. Are new rubber seals available for both windows.
Also what door light switches are best to use to replace the old ones as mine are stuffed. Is there any better seats to swap the old Brumby ones without doing major mods?

Cheers,
Cars: 02 Subaru Outback
85 Subaru RX Turbo Coupe (sold)
92 Subaru Brumby (sold)

User avatar
El_Freddo
Master Member
Posts: 12637
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Mon May 18, 2009 7:41 pm

G'day RX coupe!

I'm sure you can still get the rubbers for each window - check ebay, they usually have the windscreen rubbers for sale somewhere. I've never looked for the rear one.

As for the door switches, I grabbed a set from an '84 touring wagon, they were a much better design - these ones can be cleaned unlike the units they were replacing that were all inclosed. They were a direct swap, no chopping or changing of wiring either ;)

I haven't looked into seats, but someone here will know.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
RX Coupe
Junior Member
Posts: 65
Joined: Mon Jun 16, 2008 8:07 pm
Location: S.A.

Post by RX Coupe » Mon May 18, 2009 8:08 pm

Thanks for that Bennie, I will have a look at U-Pull it tomorrow.

Cheers,
Justin
Cars: 02 Subaru Outback
85 Subaru RX Turbo Coupe (sold)
92 Subaru Brumby (sold)

User avatar
scoobymine
Junior Member
Posts: 170
Joined: Wed Dec 24, 2008 3:52 pm
Location: Vasse W.A

Windscreen seals

Post by scoobymine » Wed May 20, 2009 6:14 pm

I got front seal from Oz Auto moulds and rubbers in Victoria.
I'm in W.A, they were terrific, had it to me in a day or so. They may have the rear one.
Tel: 03 97031522

Cheers

Post Reply

Return to “Subaru Chat”