The ***ALL NEW*** AUSubaru.com.au Forums

Apologies to those who expressed an interest in this, however I have decided to keep it for the purpose that I originaly bought it for. Down at the shack to tow the tinny down onto the beach. Picked up a set of 14" sunraysias for it, so now just looking for some tyres. Anyone got any large-ish tyres...

Also comes with a Gregory's manual. I already have one so don't need another. Very handy.

lol, yeah not a bad opition. Not registered atm tho. Only 1 month out though so can still re-reg with out going over pits

Hi guys, I have for sale a white 88 4wd L series. I bought this off Frosty with the plan to keep it down at the shack to tow the tinny down to the beach, collect wood etc. I have since decided that I can just use my existing L series for this, so this car is up for sale. I have change the oil and fi...

I reckon I'll take it. Sounds perfect to leave down at the shack to take the boat down to the beach. I'll talk to you again when you get back.

Cheers
Sam

Can't see how 'completely blocked' breather lines could allow oil up to the air filter :p Nah, not the crankcase breathers, they were clear and oil was being pushed up into the aircleaner. As previously mentioned, blow by probably had something to do with it. But that alone wouldn't have caused the...

from the breathers, through the catch can and into the intake.

A link to a catch can discussion on the RS forum.
http://www.rslibertyclub.org/forums/sho ... ight=catch

Not a suby but I used a air compressor filter like this:
http://www.srtforums.com/forums/f75/how ... all-97923/

i have have had oil in the intake area before. Lots of it. Was caused by all the PCV hoses being blocked with carbon (completely blocked) , not allowing the engine to breath properly. Just check all your hoses PCV realated hoses are clear of carbon. An oil catch can is also a good idea, but not enti...

I have for sale a pair of AS NEW rear kyb shocks for an L series 2wd sedan. Part number 341214. I bought these for my vortex but they sit too high, I had to buy the wagon ones as I have a 4wd rear end in the tex, so no need for these. They have probably done a total of 2km with me test driving the v...

ended up going with the redline rectangular filter with a blank base and cut my own hole out.

The twins absolutely scream with this much air flow. Sounds awsome

and i've even got room for a spare under the bonnet now too! bonus.

hey guys. On holiday up at st helens for new years and my alternator has died !!

Anyone got an ej alternator spare in the east coast area?

If so give me a call. 0458 378 050.

At least im at the iron house brewery

thanks heaps.

Sam

I have a pair of kyb rear shocks for sale. I can't seem to make a comment in the thread to bump it back to the top. Does anyone know if there is an easy way to bump it up? I have seen some very old for sale threads bumped up the top without people even posting, i guess this a different issue. Thanks...

Bought a set of brand new kybs for the back of the vortex, turns out I bought the wrong ones so they are up for sale. Done about 2km so essentially brand new. kyb part number 341214, they are for a 2wd sedan and have higher spring seats than the wagon ones. More info in the for sale section or just ...

I have for sale a pair of AS NEW rear kyb shocks for an L series 2wd sedan. Part number 341214. I bought these for my vortex but they sit too high, I had to buy the wagon ones as I have a 4wd rear end in the tex, so no need for these. They have probably done a total of 2km with me test driving the v...

quite rare and sought after. There was an average set on ebay not long ago that went for about $600...

Hey guys, need the clamp that goes behind the handbrake lever that holds the cables to the trans tunnel. anyone got one?

Cheers
Sam

yep, i've got a single piece tailshaft in my tex with an ej20 conversion. Having issues at the moment with clearance to the ej handbrake fastening bolts on the tunnel. Not sure where the tailshaft came from as it was in there when i bought the car. Has potential though, just need to find another way...

yep, still got it, let me know when you're coming down and we'll sort something out

ha, i had a feeling this might happen... :) mine is a series 1 vortex so the electric window switches are different, hopefully the surround is the same. Should be. Can't have the stalk with the lights and wipers, i need that. plus they are different between series 1/2, so might not work depending on...