The ***ALL NEW*** AUSubaru.com.au Forums

Have spent all morning on this in the shed and basically..there is a large white wire that should have power to it that goes to the ignition switch, alternator and fuse box (and battery)..its all connected apparently. There is no power anywhere in that wire and it should also have a connection to th...

G'day Paul..Don't suppose you want to come over to Qld and look at some wiring ..I'll shout you a beer. lol.

Yes...not much doing today...raining here and I've got it in the car port where the light was much better when the weather was fine...so went to town and got a coupla things I might need...real good insulation tape (not sh-tty pvs plastic stuff) and had a bit of a look round super cheap and dick smi...

Yea....that has crossed my mind also but is still really only a temp fix. I'll have another look tomorrow and see if I can trace it further back from the key and see if I can pick up power in there. I bared the ends of a small piece of insulated wire and bridged across the fuse box from the horn fus...

Well fusible link is ok...traced that main wire right around the front of the car under the radiator and comes up inside the drives side of engine bay. There it turns into a birds nest, what a mess who ever wired this thing. Once I got some of the insulation off it is just a real mess whoever did th...

Hey there Steptoe...I've been pouring over wiring diagrams this morning for both brumby and EA82MPFI and on my third cup coffee. There was no power anywhere at ignition switch when we did initial checks at breakdown site so looking back toward fusible link again.It checked out initially but thinking...

Quick update. Julian and I went and retrieved the car today in his Kluga towing a rented car trailer. Car was still safe and hidden, many thanks to the property owner who came out to meet us. He stated that he was the past owner of a forrester but now a subaru tribeca. I asked him what he thought of...

Thanks everyone for working through with me on this. Paul..you are a mindreader...I've just got off the phone with Julian who has just flown back from out west and we were just saying ignition barrel. Sometimes when I have gone to start the car, there has been a delay for the ignition to light up. (...

Thanks mate..yes, I was on the phone to my son who was out west waiting for me..His mates came back with the fusible link issue...I did find one in the system. Comes outside the harnes and looks cloth covered then goes back into the harness about 2inches along. It looks ok. Battery is secure and is ...

Hi everyone. Just thinking out aloud here and putting to pen my thoughts. Its one in the morning. I had my EA82T brumby all loaded to go on a trip out west Queensland for a week and have been looking forward to this for a long time. I've done numerous trips all around south east Qld with no trouble ...

Thanx mate. I checked it later when it was cool and it didn't need any afterall. I've had a more serious issue since. Will post in new section. thank again.

I had the flu back at Easter....got sick just after I knocked off and came good tuesday morn after easter Monday......feel cheated getting sick on my own time...

Quick question thanks

What is the correct type of oil for power steering that is attached to an EA82turbo engine...thanx..got a couple of bottles here and can't remember which is the correct one.

Electric fans???? all working ok??

Other remedy is to lose the gear box, move the rotor and its gearbox back and just go rear wheel drive...????

zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz (gotcha)

Why not. I wouldn't mind coming down if I can see my way clear..should be there..

Problem with my brumby was over positive camber when I bought it... \ /. 3 inch lift running L series hubs to cater for the larger disc pads on MY brumby lower control arm and standard radius rods and tie rod ends. I went L series lower control arms, ford radius rods and camry tie rod ends to correc...

mmmmm. Yes I know.....

Ya lost me...anyway good luck with the rotor....I've been following your thread....(I just think that the engine conversion we spoke of would be too radical)