The ***ALL NEW*** AUSubaru.com.au Forums

Hey did that Brumby at dapto with the caved in passenger door still have the floor Matt's?

It's still together but it is a wreck, I was going to use some parts for an 05 outback.

Well it's a pity it's not winter yet. But their always well sought after in jindabyne etc, dirt cheap to run and you don't need to fit chains when working on the slopes.

An auto oil cooler (Included in the tow pack) is the go plus tyres @ 8psi with a compressor for when you get on the hard stuff. but the best thing as has been said is a companion vehicle even if you need to tow them out yourself. But a good tip is don't use the brakes just coast to a stop.

Actually I have an L although would prefer it wen't whole- $100 as is where is.
I forgot an 01 imprezza bug eye 2.5 manual no drivetrain.
MY not sure on quality of the DUAL range gearbox.
Sorry early liberty air con compressor went to fitting air con into my old wagon!

YEah i've had bad experiences with windscreens O'brien. but as said i fixed my own windscreen in the brumby and got through rego and still going years later, Within four days of rego after having my new windsreen fitted I got a massive chip and went to O'briens they said they couldn't fix it but cou...

Sounds more like the MAF sensor to me, Someone please correct me if im wrong!

91 liberty sedan 97 heritage sedan 87ish MY wagon Possibly 05 liberty sedan Cleaning out the paddock, most parts available they were all whole cars but now I wan't to make room and have a week off. Ask away any trivial stuff is as good as free in fact most the stuff thats left is beverage prices plu...

Well im a fan of my rockford fosgates same thing I have a sub for my brumby but its almost never in there as the 6.5 splits have plenty of bass and fortunately the tweeters mount anywhere because with the roof off it gets quite noisy at 120. Oh and a local car stereo store refuses to sell rockford b...

My vote is on heat gun, you dont need 1500 degrees though just a home handyman special. All i ever use is a wire cup brush on a four inch grinder but wearing long sleeves and decent gloves.

fantapants wrote:i am thinking of putting a 5 litre holden motor in

Alex wrote:yet another one i'll believe when i see it.

goodluck!

Been done, if its worth it you decide!



"If it ain't broke don't fix it" Cute!!!

Single or dual range?

If you buy the one from tassie on gumtree i'll trade the bullbar fo a bumper and all required foam etc plus the cash difference, I looked at it but I want the outback plus its more than i want to pay too!

If you don't have any luck P.M. me!

I got quoted about a grand to replace a worn steering rack by pedders, then I took it to my local specialist howard revell and turns out it was the rack bushes so i walked out with change from $50.

Rather tempted... my folks are even visiting down that way too, pity theyve got the camper on the back of the ute otherwise i'd ask them to swing past!

I've got one you can have for postage plus maybe some advice. I'm not sure what condition it's in as its out of a wreck what sort of time frame do you need it in.

Hi all Ive been running water injection for a little while now but unfortunately not the intended type (Blown head gasket). So now is time to rebuild my EA81 as the head gasket has a hole the size of a five cent piece. But after getting the head etc machined id like to upgrade a few items while its ...

If no one else wants those crossmember spacers i'll take them.
and providing your prepared to ship them to the east coast!
I want i couple as templates for new lift blocks!

My EJ25 RX had a similar problem, So I started basic fault finding but I bought it as a wreck and had a big whack or two. But in the end I worked out the fuel pump was far too quiet so pulled it off to replace it when I found both the wires for it just dangling in the fuel. I hooked them back up and...