The ***ALL NEW*** AUSubaru.com.au Forums

looks straight

Ron I have a few to spare. 1 has been cooked no carb, dizzy or water pump. 1 was running OK but has done a manifold gasket it has not been cooked so i am told NO water in oil. 1 with recoed heads no manifold or dizzy 1 good runner was recoed, removed only for electric conversion. 1 fully recoed, new...

scored the switch and relay from a coupe on the weekend so I dont have to vandalise my MY wagon to get intermitent in my red brum.

the nut is welded. the bump stops unscrew. Soak the stud in crc or similar, try to remove and dirt on the stud then try to unscrew it with multi grips or chissel.

awsome scooby. please share your tuning set up

Taza how new is that motor. Ya gotta wonder if they put the compression rings in the wrong way or forgot the oil rings. subydog. My first thought were rings have lost tension but If it didnt actualy over heat but still got pretty hot the oil may have lost its lubricating ability and my be thinner. G...

Thanks for the heads up Jake.

lower the front end by backing off the height adjusting nuts on the struts

yer my black brumby fuesalble link coroded and just broke one day, luckily I suspected what the problem was, twitched it back together and drove back to the farm house.

Neat MY there 84

Yer "Sutton" are my prefered brand, The JBS ones are sutton ones in a JBS case and are a little cheaper.

Thanks Gannon, I do remember that H6 OB. I had remembered your post in my trailer thread and had the thought in the back of my mind. The idea is great, the torsion bar set up is very heavy in comparison to a std trailer axle and the bearings could be hard to get and difficult to replace, although I ...

Thanks Vince. Just passed the theory now just have to get some experience with some experenced masters to fil in the log book. My Trailer is in a real bad way and I an unsure what to do ATM. 1 build another trailer Cost $3-4 hunderd 2 Buy a second hand trailer $4-5 hundred 3 buy another boat, motor,...

Almost sacrificial but hey sometimes ya just got a do it. Ironic cause the bloke who bought the Brumby wanted something to launch his 16ft fiberglass ocean going 1/2 cab boat and i used the cash to buy a boat. Kinda makes me sad cause that brumby will be rusted to bits in a couple of years for sure ...

Fusable links under the bonnet near battery. If the barrell has a bad contact it can be fixed by removing the switch mechanism, it is held in to the back of the barrel with one philips head screw. Spray CRC 226 into the mechanism and rotate the switch back and forth gently with a blade screwdriver. ...

They look pretty neat but why the need for 90deg on the sedans

yep it is that easy.
I did tap into the power befor the interior light so the map lights could be switched independantly and Oh put some of those LED bulbs in the map light they work awsome.

Can 2" strut spacers be fitted without having to fit crossmember blocks. This is the same as a Brumby. Well they can be fitted with a bit of stuffing around. Had to undo the radius arm rods and put a 6mm spacers in to get the right lenght though. Bennie the black is only pressure pack "saturn black...

Now this is livin, camera batterys went flat.. Our daughter loved the bumps on the beach except when we got airborne, our Son thought it was great especialy when we chased the seagulls and both of them laughed heaps when we tried to out run a golden retriever, the dog had us for a while till we got ...

Yer she is registered and driving Bennie.
Quick question.
Can 2" strut spacers be fitted without having to fit crossmember blocks. This is the same as a Brumby.