The ***ALL NEW*** AUSubaru.com.au Forums

nicely wedged in there its a pity Subaru didn't do something like that for the later brumbys and the motor looks like it should be in there

Is that the brumby radiator squashed in the fit or a wrx one?

TOONGA

could some one with a lift kit installed on a brumby please post pics of all relevant areas that need to be lifted every time I look for pics on the net I get pictures of lift kits in a neatly arranged pile on a lovely white background or sites that show lifted L series and libertys etc but no brumb...

some stupid bastard stole it last night and smashed it into parked cars and it's written off. Was a great little runner, fantastic and didn't cause me any problems, I was looking forward to getting the heater repaired with my tax return... RIP little buddy. You were wasted and it's a damn shame. (E...

Suparoo wrote:or this

daza wrote:

Daza.

Imagine an old subi with either of those in them


TOONGA

here is a heavily modified ea81 with fuel injection

http://www.airtrikes.net/engines/large/subaru7_l.jpg

notice the direct drive for the propeller

and have a look at the last motor here

showthread.php?p=123292#post123292

TOONGA

Why not just get the equivalent in a cheaper brand? BTW you might also need to consider the length of the thread. Dane. because the cheaper brand is not available here in bunbury otherwise I would :) I always use the Z145A on my EA81. Not really sure why but the rod knock seems a little quieter tha...

ok so the thread is metric on the liberty Z495 filter I did a search at ryco and found all these filters that are around the same size with the same 3/4 thread as the Z493 filter - Height - oil seal - seam diameter - thread Z125 -76mm - 63mm -82mm -3/4-16-UNF-2Bmm (closest to Z493) Z158 -101mm - 63m...

Im driving a 89 brumby with the Z493 filter http://www.rycofilters.com.au/catalogue/product/make/subaru/model/brumby/part/Z493 my wifes liberty uses the Z 495 filter http://www.rycofilters.com.au/catalogue/product/make/subaru/model/liberty/part/Z495 can I use the Z 495 or is the thread different to ...

Won't get a jet with a ea81.... though people do use em on planes I hear ;) they sure do http://www.prachapter34.com/converting_engines.htm http://www.inficad.com/~bdhull/engine.html some very interesting links there as well oh and in hovercraft as well or hoverwing? http://www.hovercraft.com/conte...

do you still need a passenger window as i have one but Im in Australind so you would have to be prepared to come get it it will only cost you your fuel and time

TOONGA

Well my son was sad because his friend couldn't come over after school so as a treat I took him down a simple sand and mud track in low range things were going great until my poor brumby jumped out of low range and sank to her floor pan http://img.photobucket.com/albums/v284/toonga/25-06-09_1529.jpg...

I think out the top as the engine crossmember and other suspension stuff will need to come out if you go out through the bottom

if you have the time it is way easier to split them and pull out both as seperate parts more fiddling but less weight to move around

good luck either way


TOONGA

that would take some serious work to get it to run in a straight line

I would love to mate a brumby with a forrester like my avatar

TOONGA

when I buy a second hand car I try to find out from the owner what they used and continue to use the same oil a mechanic once told me when you change the oil brand the engine gunk can build up in all the wrong places (usually from synthetic to mineral or vice versa) otherwise I use castrol 20w 40 or...

hello Ukbrumby good luck with the conversion

TOONGA

pull as much of the polution rubbish of as possible, I had one ea81 that I ran with very little pollution gear, it was great but in those days we had lead in our petrol not in our water :) and if you are going to run it at a static speed advance the timing slightly, you may have to play with it a bi...

the best subaru off road either a hire car or somebody elses

TOONGA

nudge keep looking or try and get him down by at least 3000 dollars

TOONGA

as you are a non subscribed member you can only post in certain areas

a simple donation to the board will fix all of that

TOONGA

sounds like you have excessive pressure in the box whixch is causing the seals to fail especially if its filling the transaxle to overflowing out the filler tube

what type of car is the box in?

TOONGA