The ***ALL NEW*** AUSubaru.com.au Forums

Thanks very much ladies and gentlemen, I will give busfrieght a go.
Kind Regards
Matt

I don't know whether this is the right area, if isn't could you please move it to appropiate area. Does anyone know any good cheap frieght company's? It is a lift kit going from Tassie and Townsville if that helps.
Thanks in Advance
Matt

Chubby37 you are half way right, if you are using VHF SSB (single side band) it will got better range than UHF, however the longer range varies greatly. Just for your information CB (Citizen Band i.e stuff you don't need a licence for, buy off the self at dick smiths, etc) use 40 channels whether UH...

I would have to disagree, it does work, or has for me for about nearly 2 years of use. To clarify i was talking about tac welding the "shifting fork attaches to the rod sticking out of trannie". I do agree with if it was done wrong it could stuff up the shaft/seal/fork. I am not saying you must do i...

You can also drop a tac weld on the shaft carefully. Another trick is to grab some second hand bushes from the wreckers and double them up where posible. ie. two bushes where one use to be. Makes the shifter a lot stiffer, even less slack.

That looks real nice, good job.

Matt

Phizinza they have some different ideas over there.... however there was some useful info which included the fact a jeep snorkle can be modified to fit.
Thanks
Matt

Thanks for that dwayneb, i have droped him an email. You wouldn't happen to have a pic of one would you?

Matt

Has anyone made a snorkel for Brumby/MY? How hard is it? I haven't been able to find them aftermarket, or does anyone know where i can get one from? Also does anyone have some photos of one on a MY/Brumby?
Thanks in advance
Matt

Lets just say I am positive

Yes, we should organise something if there is enough of us in the gerenal area?


Matt

First step short out the Green and Black wire to a good earth on the body. If the lights (inside/dash) came on, the problem is on the earth side. To fix this follow the earth back clean the conact and reconnect. Also check the wire for continuity of the wire If the lights (inside/dash) Don't came on...

Adding to what dave has said, is the light on the dash coming up? If not in the dash assembly there is a diode (for each door) which could have gone open circut. It could also be the wiring to the dash or dirty connection which would cause this problem.
Matt

Sorry to hijack the post Malc but how hard is it to convert tank sizes? Because an extra 15L sounds good to me.

Matt

EJ20 and Auto
1 Bid at $100 so far
http://cgi.ebay.com.au/SUBARU-ENGINE-2- ... dZViewItem

Matt

Have you tried a Tie Rod Removal Tool? Just like a big fork with a increasing angle you stick between the hub and tie rod and belt away.

Regards
Matt

Mine is only 45 Litres in the brumby. I know this for sure as well.

Regards Matt

obzelite
What gearbox/s have you got in the tray? And where and you located?
Regards
Matt