The ***ALL NEW*** AUSubaru.com.au Forums

Anyone spoken to a ginger beer lately? I had a chat to my local one today that had previously ok'd a ej22 into a brumby and the gist of the conversation was have it done in the next 10 days or don't even bother. The new system is way more complex and his fees will be going up from about 500 ish to t...

Despite some of the oxygen bandits on this forum, i found this showed how good it works on a whole car http://www.boostcruising.com.au/forums/index.php?showforum=174 can you narrow it down please. http://www.boostcruising.com.au/forums/index.php?showtopic=140842 yeh i suck at linking. http://www.go...

Despite some of the oxygen bandits on this forum, i found this showed how good it works on a whole car
http://www.boostcruising.com.au/forums/ ... wforum=174

awesome work. Might pay to mention not to use silica sand as silicosis is some nasty sounding stuff. Also why were you doing this today? there were some pretty fast cars blasting around the bush up your way today, some even subaru's. Pity it was $35 entry to the Super Special Stage at the jetty last...

try this 10/97 model wrx aus delivered, grey black "sti" interior. 2 pot vented front 1 pot (solid? its dark outside now) rear brakes, late EJ20G (ie EJ20G block, EJ20K heads, intake and ecu) trans is TY752VN6AA which the only info on the net shows as UK model WRX 2000 GT. 3.9 rear diff. JF1GC8KD3WG...

Could be one of two things: the cable that runs from the temp dial into the engine bay mounted heater core bypass valve thing, possibly snapped or stretched to buggery. the valve itself may be seized. you can buy these new from subaru fairly cheap. I have one sitting at home so i can get the part nu...

damn the progress your making is amazing, actually inspiring. Its making me rethink what i had planned to do anyway. Have you considered using different subaru trailing arms for the rear? maybe the shape changed over the years / models and may suit / make fabrication easier. I know forrester trailin...

Got a one way check valve before the pump (from tank) to prevent a "dry" prime of the pump? I seem to remember someone saying that these also like a positive inlet pressure too.

bumping this up again Disco, what are your thoughts on using these compression rods for a L series armed brumby. already used in compression from the factory but the radius rod mounting hole may have to be clearanced a little to get them to fit. http://i901.photobucket.com/albums/ac211/stenno_photos...

i have these threads bookmarked in regards to CVs. http://www.ausubaru.com.au/showthread.php?t=14553 http://www.ausubaru.com.au/showthread.php?t=18466 I have MY & L efi & lib gen1 auto shafts if you need any measurements etc. My plan for EJ 22 auto into brumby with L front control arms is: 98 wrx hu...

99 crank is rear thrust isnt it? EJ20G (closed deck) blocks are centre thrust so you will be up for some machining costs. what year model Forester heads? Phase 1 or 2 inlet bolt pattern? judging from your other build thread v2 sti ECU still? i think that there will be some rewiring needed if changin...

Great work. Thanks for putting up the photos of the gearbox crossmember, there is not much info floating around for an EJ auto into MY body. How is the bonnet and transmission tunnel clearance with the 2 inch lift? and is the amount of lift the minimium you would recomend for an auto gearbox? Im alm...

If its anything like gen 1 liberty fuel senders, try giving the sender a clean first. its a common problem, there is a DIY FAQ thingy on RSLC im sure. otherwise try what i did; * wait till the tank is almost empty. * grab a bottle of metho, rag and a toothbrush, dustpan brush/scrubbing brush * gain ...

Are paintball guns illegal where you are? this may help and provide hours of entertainment too.

http://www.paintballsentry.com/

Anyone know if Toyota AE86 tension rods are suitable? they look like the "right" shaped ends.

picture and for sale here :
justjap.com

very vague dimensions here:
megan racing

I might suck it up and find out in the next few months

Ellenborough Falls is really nice, so is Rawson falls on Comboyne. nothing too offroad to get there to either. You could get there in a 2wd road car no worries as its mostly graded dirt roads if i remember correctly. With Rawson falls just try not to leave it too late in the day as the cold chill se...