yep you have to cut the entire front section from a quad headlight model and swapit with the one on yours
its easier to do the relay mod and use some higher wattage globes or hids
Search found 324 matches
- Thu May 28, 2009 9:00 pm
- Forum: Electrical, Wiring and Lighting
- Topic: Swap Brumby twin headlights to quads
- Replies: 4
- Views: 1805
- Thu May 28, 2009 8:54 pm
- Forum: Engine, Gearbox and Diff
- Topic: What is the best Gearbox to use ?
- Replies: 25
- Views: 4598
centre diff lock is from the import lseries turbo box there was one on ebay last week AlpineRaven you cant swap the entire gear set from a single range rs 1st and 2nd are cast as part of the input shaft scorpian low range is the lowest you can get if ya willing tho fork out the coin the combination ...
- Thu May 28, 2009 8:36 pm
- Forum: Engine, Gearbox and Diff
- Topic: Brumby gearbox ratios? (5 or 4 speed)
- Replies: 17
- Views: 4841
the zook transfer is rwd or 4wd so is the hilux but phisically about the same size and stronger the lux transfer removed from the gbox could be coupled direct to the motor would need a splined adaptor to your motor and adaptor plate (im thinking direct coupled here not clutch that would require more...
- Mon May 25, 2009 6:56 pm
- Forum: Exhausts
- Topic: Dual mufflers on L series wagon?
- Replies: 6
- Views: 2241
- Mon May 25, 2009 6:30 pm
- Forum: Engine, Gearbox and Diff
- Topic: Brumby gearbox ratios? (5 or 4 speed)
- Replies: 17
- Views: 4841
why not keep the two rear diffs idea and use a transfer case from a serria or a hilux or landcruser depending on how big the motor is ie 2 speed gbox and the low ratio can be changed to sute your needs heaps of companys make lowrange gearsets for these transfer cases with ratios down to about 200to1...
- Sun May 24, 2009 10:45 pm
- Forum: Engine, Gearbox and Diff
- Topic: Front Main Seal Replacement on a 4 Speed Dual Range Box (Brumby)
- Replies: 9
- Views: 2010
- Sun May 24, 2009 10:34 pm
- Forum: Trouble Shooting
- Topic: EJ20G misses only at op temp ??
- Replies: 13
- Views: 4289
- Wed May 20, 2009 12:20 am
- Forum: Engine, Gearbox and Diff
- Topic: Five speed for Brumby
- Replies: 7
- Views: 1815
- Thu May 14, 2009 9:08 pm
- Forum: Trouble Shooting
- Topic: Alternator broken but not broken?
- Replies: 6
- Views: 1617
- Thu May 14, 2009 8:57 pm
- Forum: Trouble Shooting
- Topic: EJ20G misses only at op temp ??
- Replies: 13
- Views: 4289
yeah microtech have an o2 sensor input on some modles but it only displays on the controler no changes are made using it and the tps will only be using the pot the switch is left out its the same with my adaptronic your safe to increase the trim above 4% to see what happens the engine will just get ...
- Thu May 14, 2009 7:59 pm
- Forum: Conversions, Modifications and Performance Upgrades
- Topic: HD Clutch Vs Normal Clutch
- Replies: 10
- Views: 3942
- Mon May 11, 2009 10:25 pm
- Forum: Trouble Shooting
- Topic: EJ20G misses only at op temp ??
- Replies: 13
- Views: 4289
sounds like the settings have been changed microtech has a table someware in the menu to set trim vs water temp if the 80-90deg setting has been changed it will change the whole map ie if it was set a 10% and was changed to 20% 10% more fuel is injected accross the map but only in the temp range tha...
- Mon May 11, 2009 7:53 pm
- Forum: Fitting EJ motors to MY & L series models
- Topic: another brumby conversion.
- Replies: 10
- Views: 5564
- Sun May 10, 2009 10:37 pm
- Forum: Fitting EJ motors to MY & L series models
- Topic: another brumby conversion.
- Replies: 10
- Views: 5564
is it a single or a quad cam engine most of the single cam (one cam wheel eighter side) are non interferance for a late 90 car you have to take the key and ring from the doner car with the imobliser modules to get the car to start im sure someone here put a liberty steering rack in a brumby or wagon...
- Fri May 08, 2009 4:38 pm
- Forum: Tech Manual
- Topic: wanted: ej20 ecu pinout 2001 forrester limited
- Replies: 7
- Views: 4657
wanted: ej20 ecu pinout 2001 forrester limited
after a pinout for a late ej20
the model with the ecu mounted on the engine rear drivers side
2 plugs one to engine and one to the body
the model with the ecu mounted on the engine rear drivers side
2 plugs one to engine and one to the body
- Mon May 04, 2009 12:33 am
- Forum: My Subi
- Topic: Brumby Project
- Replies: 38
- Views: 11653
back on the vacume pump
have you found these yet
first one on the page http://www.evpower.com.au/-EV-Parts-.html
have you found these yet
first one on the page http://www.evpower.com.au/-EV-Parts-.html
- Tue Apr 28, 2009 11:08 pm
- Forum: Open Slather
- Topic: Hey, AndrewT!
- Replies: 11
- Views: 3233
- Tue Apr 28, 2009 10:59 pm
- Forum: Subaru Chat
- Topic: KF Laser seats in Brumby
- Replies: 8
- Views: 3022
- Mon Apr 27, 2009 12:52 am
- Forum: Open Slather
- Topic: Garage Roller Door lock - make more secure?
- Replies: 10
- Views: 6864
- Mon Apr 27, 2009 12:43 am
- Forum: Open Slather
- Topic: Hey, AndrewT!
- Replies: 11
- Views: 3233