Search found 11582 matches

by steptoe
Fri May 20, 2016 7:19 pm
Forum: Bantum’s Works
Topic: 3D Printed Replacement Parts ...
Replies: 77
Views: 57874

Yep Steptoe - if you do want to go to the trouble of getting some 'Brumby' badges made up, don't let me stop you. ( I might get pair myself ) Just haven't had the time or finances to do it. Just remember it's been released on a 'creative commons' licence, so you will need to acknowledge where you g...
by steptoe
Fri May 20, 2016 7:17 pm
Forum: Bantum’s Works
Topic: 3D Printed Replacement Parts ...
Replies: 77
Views: 57874

With the advent of some new 3D printing technology, finally we have been able to re-create all those broken / sun faded plastic parts ... Well its done, so here are a few to get you started : • Front Fender ... BRUMBY : http://thingiverse-production-new.s3.amazonaws.com/renders/de/3b/5b/c4/12/Subar...
by steptoe
Fri May 20, 2016 7:00 pm
Forum: Open Slather
Topic: unplugged ISP Mon, OE still works Friday ??
Replies: 2
Views: 1803

it was sent to the dodo account, so it works not like I thought !
I had better work out how to get in there and remove its message guide stuff !
by steptoe
Fri May 20, 2016 1:51 pm
Forum: Open Slather
Topic: unplugged ISP Mon, OE still works Friday ??
Replies: 2
Views: 1803

unplugged ISP Mon, OE still works Friday ??

OK, this is weird or what ? I unplugged my dodongle on Monday in order to not go over my allowance coz then the over run rate costs almost ten fold ! Pulled it out without safe removal technique too !! OE is set to an dodo email, so is all the jargon inside, dodo even told me I would lose my dodo em...
by steptoe
Thu May 19, 2016 10:29 pm
Forum: Wanted
Topic: WANT timing belt covers EA82
Replies: 4
Views: 2954

it does, thanks

I will send you a private message

and if you don't/can't use PM system please lemme know
by steptoe
Wed May 18, 2016 8:22 am
Forum: Engine, Gearbox and Diff
Topic: gudgeon pin circlip install detail
Replies: 0
Views: 10191

gudgeon pin circlip install detail

just looking at a packet of gudgeon pin circlips from a set of Lazorlite pistons made in Japan by Toto Sangyosha. circa 1982 by the looks ! There is a diagram printed on them to indicate the circlips should be installed so that when looking at each pistons gudgeon pin through the blocks bung plugs y...
by steptoe
Tue May 17, 2016 8:28 am
Forum: Brakes, Wheels and Tyres
Topic: F-ing close call
Replies: 11
Views: 8729

Nuts don't just drop off. I've had loose nuts that amplified when I had load of bricks on board and made bad noise that forced me to investigate. Same position for me too. Maybe Chrysler were smart in doing left hand threads on the left ? Your rear left wheel where it was parked at work - would it h...
by steptoe
Sun May 15, 2016 10:03 pm
Forum: For Sale
Topic: [TAS] 89 L series - with lots of goodies
Replies: 18
Views: 12627

nice bit of luxury there - 72,000 bucks worth in 92 weren't they ? Yours looks to have been kept well all its life :) Gotta be happy with that !
by steptoe
Sun May 15, 2016 12:02 pm
Forum: Wanted
Topic: WANT timing belt covers EA82
Replies: 4
Views: 2954

WANT timing belt covers EA82

well, I need some or all of the covers and undercovers as it seems my latest score has overheated at some stage where the backing covers (is that an oxy-moron?) have drooped all over the backing bolts. Even the front centre plastic cover had to be ripped off its melted self. If you have a set of the...
by steptoe
Sun May 15, 2016 8:57 am
Forum: Subaru Chat
Topic: If you need a part No.
Replies: 20
Views: 11534

been self cancelling since 1998, so sort of part of my driving experience :)

Interesting to note you have also compared.

steppy signing out of my last dodo transmission before allowance runs out and starts costing A$100 per GB !!

and...back in via a more cost effective pay as you use by XXXXXX
by steptoe
Sat May 14, 2016 9:18 pm
Forum: For Sale
Topic: [TAS] 89 L series - with lots of goodies
Replies: 18
Views: 12627

So, Sam, show us yer SVX !! please ...??
by steptoe
Sat May 14, 2016 9:14 pm
Forum: Restorations and Project Build Ups.
Topic: Silverbullets' resto: Engine, gearbox, suspension
Replies: 479
Views: 1379969

If you can afford a single piece tailshaft it may eliminate untidy flat bar sitting underneath, avoids trying to line things up. I went single after a long time, the tube diameter was a little bigger and found lost fifth gear while in motion - a lump of weld was hitting on the shift lever as I went ...
by steptoe
Sat May 14, 2016 9:06 pm
Forum: Subaru Chat
Topic: If you need a part No.
Replies: 20
Views: 11534

and I reckon that the 85 86 L series had the same part in their combo switches. I kept one ...somewhere ...??? for comparison one day
by steptoe
Fri May 13, 2016 11:51 am
Forum: Conversions, Modifications and Performance Upgrades
Topic: Vacuum Advance for EA81T
Replies: 19
Views: 10568

well, if we can trust that naru found EA81T worked well with the EA82T vac can ...spoke to Mike of advance which is a father and son concern, I could send my good newish one to him to measure up for specs, so you would get an EA82T spec unit as in spring tensions etc. Says he could likely build you ...
by steptoe
Fri May 13, 2016 11:27 am
Forum: Subaru Chat
Topic: If you need a part No.
Replies: 20
Views: 11534

Nice one mate. Another good website for L's is http://parts.subaru.com/ - an American site but part numbers are generally the same. I've guided Frog to the part I need with a part number from this site. It's so good for research for gear ratios etc but can be tedious. Also I'm not sure it covers th...
by steptoe
Fri May 13, 2016 11:24 am
Forum: Conversions, Modifications and Performance Upgrades
Topic: Vacuum Advance for EA81T
Replies: 19
Views: 10568

Good, What I saw in it was that the EA82T vac can and module will work in EA81T on the megajoltE I see they have up to 3 bar MAP sensor, so that should cover boost such as turbo. You may just be a pioneer doing an EDIS on EA81T I am wondering out loud if/how the MegajoltE EDIS can use a knock sensor...
by steptoe
Fri May 13, 2016 8:58 am
Forum: Conversions, Modifications and Performance Upgrades
Topic: Vacuum Advance for EA81T
Replies: 19
Views: 10568

*cough * cough

can I spell it out for you ?

to quote the post by naru I am refering to

"I bought a complete ea-82 turbo dizzy in order to get an ea-81 turbo vac advance.Spare ignition module was a bonus.
Complete dizzy is probably only a few more bucks"
by steptoe
Thu May 12, 2016 11:07 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: Vacuum Advance for EA81T
Replies: 19
Views: 10568

read the third post from the top by naru

http://www.ultimatesubaru.org/forum/top ... -question/

might answer some questions re interchange of EA81T and EA82T dist bits :)
by steptoe
Thu May 12, 2016 7:42 pm
Forum: Subaru Chat
Topic: If you need a part No.
Replies: 20
Views: 11534

Yes, feel much the same when I open my two book L Series manuals - the info is almost faultless. Better clear out your inbox Sam. Don't supose you have a part number for the EA81T stuff ? Or that might be on El-Freddo's link Glad it all worked out. What you gonna do about paying twice ? Wait for the...
by steptoe
Thu May 12, 2016 12:48 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: Vacuum Advance for EA81T
Replies: 19
Views: 10568

Yep, completely understandable that the EA81T whole assy did not cross over to the EA82T but possibly the module inside is 4 pin and has a knock control module remote ? Your can measures up same so far as my EA82T can and I know that the guy in link above has rebuilt one for discopotato3 on here - t...

Go to advanced search