The ***ALL NEW*** AUSubaru.com.au Forums

EJ22 Clutch, pressure plate and flywheel, clutch plate about 65%.

Located Morayfield QLD

Not necessarily, I have done turbo`s in the past, bolted on a new one and off you go again.

Hey am chasing a set of rola racks to suit a gen 1 Liberty sedan, if anyone has any for sale or has seen some in a wrecker perhaps.
Cheers
Grant

No mod plate required in QLD, its in section one in here.
http://www.tmr.qld.gov.au/~/media/c792a ... icles2.pdf

How much you wanting to spend?

PS. get your hands on a jappy grill for the series I, they are just like a series II grill.

They do get jammed on, fold the wiper into the upright position and give it a persuasive wriggle and it should come free. It doesnt hurt to give it a bit of a leverage under the base on the opposite side of the wiper arm so it slides up squarely.
Cheers
Grant

It probably just wasn't tightened properly to start with, your cone washer might need replacing now though as driving around with a loose hub nut doesn't do them much good.
Cheers
Grant

There are a lot of things it could be, ie:CV joint, wheel bearing, loose wheel nuts, loose Hub nut, worn radius rod rubbers, radius rod mount detaching from subframe,loose lift kit if you have one, worn uni joint in the steering knuckle, broken engine or gearbox mount, wheel out of balance with a wo...

If you want to get the rear wheels to sit back in the centre of the wheel arch http://img838.imageshack.us/img838/6075/pic0925151.jpg you can either change the lift kit blocks on the trailing arm mounts from two to three inch blocks, or fit some Gen1 Outback trailing arm mounts instead, the part num...

I still have a gen1 wagon(white) I am parting out, what parts do you still need?
Cheers
Grant

The early Momo and nardi wheels will go straight on using the factory boss kit.

A good sign of a dud altinator in the Rx is the tacho needle starts jumping.

Congrats on the new arrival Andrew.

Wahoo, gongrats to both of you, does that make me a grandad now ? Lol

Just incase you didnt know , when setting the cam belts, dont go off the TDC advance and retard markers on the flywheel, you need to look for 3 lines like this lll and line the pointer up with the centre one. Also the timing should be set between 20 to 24 degrees.

Brett. how ya getting there, I might come with ya, depending on how finances are after the cruise.
Cheers
Grant

i checked all the fuses and everything is ok. another time i had the spark wires on the wrong way (had 1432, but now 1423 as it should be - well i think so)

The fireing order should be 1324. Ie: front then back on drivers side, then front , back on passengers side.
Cheers
Grant

for off road try some dirt motorkahnas or rally style events, less bumps and you learn to get close and choose a line

This one made me have a bit of a laugh.

It may have something to do with being a 7 seater and having occupants in the boot so to speak, maybe some issue with airbags and a rear ender, handle bars through the rear window or something crazy like that.