The AUSubaru.com.au Forums

im looking for a ecu pinout for a jdm 94 impreza ej20g turbo anything will help its for a friend he has no spark after swapping it into a usdm impreza

thanks
Everett

i think im going to give up on it ive tried everything i can think of plugs wires ecu coil maf tps iac cam sensor crank sensor i dont know what could be wrong thanks for the help guys

the only two codes poping up on my computer are fuel level sensor and po440 evap emision no other codes

It has 150 psi in every cyl fresh gas and filter replaced injectors with ones i had on another motor still wont run right i think this is a lesson i learned the hard way

yes all the way up to the seats so i drained it out replaced the ecu with a new one from a salvage yard it has all the same #s as the old one dont know what else could be wrong with it

i havent changed the o2 yet but i will tomarrow i think i need to do some waterproofing b4 i go out again is there a thread about what to water proof and how i know that the ecu to be sealed and higher mounted snorkel for engine and vent tubes for the tranny and the diffs but what else

i put new plugs wires ecu and coil fuel pump the timing is dead on it runs just wont idle and kindof boggy

http://www.newenglandsubarus.com/forums ... php?t=7362





any help will be much apprerciated

hi im new to the site i live in new hampshire us thinking about lifting my forester thats what brought me to the site