The ***ALL NEW*** AUSubaru.com.au Forums

Hi , I am doing a top end overhaul on EA81 and for the first time I have to completely remove the exhaust flange thingy from the head due to studs seized in the cast iron part ( by seized I mean the stud shank completely fused to the cast iron spacer flange thingy of no name ) . Please excuse my ter...

I am trying to remove rear axles from my Brumby but they wont move. I followed gregorys instructions ( for what they are worth, I am not full of praise for gregories ) , I have driven out the retaining pins and released the trailing arm from the trailing link and now I should lower the trailing arm ...

I have just put a seal kit in my Brumbys brake master cylinder and reassembled/reinstalled it. Everything seemed to work OK, all seals in right configuration,smooth movement, all ports etc tested clear of blockage. The problem is the secondary piston will not prime with fluid.. Any ideas ?

When I travel in my Subaru Brumby I get sick from the smell of fuel rich exhaust fumes even with the window closed. Has any Brumby owners on this forum had this problem.