The AUSubaru.com.au Forums

Sure this is be a dumb question! i have two spare rear drive shafts complete with cv's. Can use the cv's on the front as i need new ones?

Morcs wrote:From A bearing Supplier number is 6207 for early subies eg Brumbys l series vortex etc

thanks i'll give it a go!

Keffa wrote:what model car is it for?

lol yea that would help!

86 brumby. i already asked if the supplier knew which ones i needed but they didn't know, they said if i can get those numbers they can try and get them!

front bearings went big time today!there is no subaru dealer here so i was wondering, does anyone know bearing numbers? there is a place that sells every one you can think of, i just need those numbers? can you help? front and rear if you know them!

hey guys. i notice a strange metalic noise coming from the under side of the brumby. i can only discribe it as a metalic clicking/ticking. it is only when moving and it increases/speeds up when i speed up.i tried pushing on the 4x4 lever and it lessens. any idea? could it be the cv's on the prop sha...

steptoe wrote:It's not addiction - it's a a disease and I not found a cure for it yet, was thinking about a third one for no good reason

lol! my misses thinks i'm sick just for liking them:D

I think getting new copper lines might not be as costly as all that. I bought a role of 6 metres of copper brake line for my trailer, I think it was about 25 bucks. The flexible rubberized lines are fairly costly tho I think. You can get a little tool which you can do the bends yourself with, or ge...

i'm addicted already! only had my brumby for two weeks and i'm already looking at another one. was at the scrap yard yesterday and hidden away in the corner was a red 88 brumby with targa roof. i looked in realy good condition. it has the same rust problem as mine in the back arches but that was it....

ok not sure if i'm really understanding everything on the fueling side of things for the brumby wrx conversion. i know i need a surge tank and have found this one. http://www.sm-engineering.co.uk/alloy_fuel_surge_tank.php what i don't get is ,can i still use the origional tank with a low pressure pu...

So this may be a little extreme to what your after for chassis rail widening, but if you only look at the chassis part you'll get the pic of what's needed. You won't have to fit another radiator support or take it off to do the job. This is a piece of work done by wrx85 , keep scrolling down, you'l...

i have checked with the old owner and he said he changed both the cv's and drive shafts. he hadn't noticed the sound before but agrees that its most likely the cv's. will try and get some new ones but knowing norway i will have to sell the motor to buy them:( thanks for the help guys. will keep you ...

I have noticed that when i have full lock to the left, i get a knocking(cracking alomst). it's only on full lock. The guy i brought it from had only just chage the front drive shafts and CV's. Any idea what it could be??

i tried that. couldn't find anyone who dealed in norway. is there any that you can apply yourself?

http://www.rhinolinings.com/index.php

I saw this product on another thread. i can't get it in norway. can you recommend any other products i might be able to get?

here's some pics of my new toy:D. needs some attention to the body work, but not as bad as it looks. my only worry is the rear inner arches. trying to get some new ones soon. i have already picked up two new wings and two doors. I have got the impreza hubs and struts on the way. hope to have the cro...

i've just got my brumby :-D and have noticed the rear inner arch is amost rusted through:mad:. it seems to be a common problem as my mate has the same issue. can i get a replacement pannel? there are no subaru dealers near me and i'm guessing that i will have to sell the car to get some pannels from...

INEEDABEER wrote:To put an EA82 in a brumby you will have to cut and re-weld the rails(too wide).Better off going for the EJ20.

ok. i didn't realise that the ea82 turbo motor was wider. is dohc? may as well wait for the ej20 motor then!thanks for the advise.

hey guy's just saying hi. i'm english but live in norway.i've just brought a 87 Brumby(my) love the car and have big plans for it! top forum!

Beau

hey guys. not sure if this has been posted before, if it has i can't find it. i've just brought a MY pickup and i'm planning on starting work on it straight away. the big plan is for a wrx motor swap, but thats when i have more money. i have found a 88 l-serise turbo being broken. i was thinking of ...