The AUSubaru.com.au Forums

After removing the auto one from there box 1986 rx auto, I see there problems You are right Gannon there will not fit I was just after an cheap fix My viscous wore out 12 months ago and I welded It up. Works great in loose stuff,but my hydraulic hand brake fitted to rear discs now locks up the front...

The clutch pack came out of there MY turbo auto
The place If like to use it is in there back If the 96 WRX 5 speed manual

Could anyone please explaine how the Clutch pack in the rear of the Auto's work.
I would like to replace a Viscous center diff (for Motorsport)

I have changed the top bearing. I got the Genuine bearing from Subaru removed the circlip swapped the bearing and slop gone colum fixed, Off memory the bearing was $40.00 roughley, and it was the same bearing as the spare column out of a 91 wagon i previously wrecked.

Chasing power Steer Rack to suit 86 Rx Please
Ballarat

Hi anyone know where i can get a good base tune for a Rx with 2.0 turbo Rs Engine and WRX VLSD G/Box & Diff. Engine management is Wolf 3d V4. I thaught i would put it on a 2Wd Dyno but of course as soon as i took out the rear half shaft she didnt move.Is Road tuning the answer?
Thanks.
Mick

Interceptor you can try adjusting it, The problem will rise to the top again soon your Clutch is fried and will need replacing soon. Sorry to be blunt.
Mick.

Thnaks looks like were gettin there

steptoe is right Ive a donar Wagon. and the plan is to swap over the fuel pump, leave the high pressure fuel line in. I would like to keep the Computer and wiringfrom original turbo, but dont know if that is possible the other wagon dose not have electric windows cruse & so on. So i dont want to swa...

Why cant i read the Tech manual Looking for info on converting a 4 plug turbo back to Carby ea82

ive got an 89 SportsWagon i just stole the ea82T out of for rx, want to put in the Carby engine back in Wagon it has full Electrics, Have a doner car it has no Electrics. how do I go with Wiring?
is it possible to keep computer wiring for Turbo Conversion (Brumby project in pipe line)

Hi Toy Rx Im impressed, I did the same thing just on a lot smaller budget mine is for autocross in Vic.
how do I convert my rims over to WRX
Thnaks Mick.

Thanks, im working on getting early WRX stuff, also have a lead on Series 2 RX Lib stuff.
sounds like these will do
TA Mick

Hi ive a L series rx auto with a ej upgrade considering L series manual the cars for Racing Wich Box is the strongest high Low or 2wd 4wd. Or how much stronger would liberty stuff be?

Jeff could you PLEASE contct me regarding configeration of your wolf as I tried to send you a PM but it is full

Ta what is the lowest for an l series please
i need a good 1500 rpm so i need a real ratio change
and have spent some serious money on this box so sort of need to stick with it

Hey can any one help PLEASE I have a 7-86 L series RX Retro fitted EJ20t 3speed auto (Manualised) with a 3.7 rear diff i belive to be open (with the rear jacked up i can spin one, the other is stationary) My quiestion is can i get seme 4.44s diffs for it as I have not seen anything about changing ra...

Im thinking of this as well would it be better with a 12volt pump in the line to ensure a good flow.

Mick G